You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
74 lines
2.1 KiB
Smarty
74 lines
2.1 KiB
Smarty
* Generated at $date - Do not edit!
|
|
* template: $template
|
|
|
|
[$seedlink.source.id]
|
|
|
|
* Settings for Geotech DR24 digitizer
|
|
|
|
* Station ID (network/station code is set in seedlink.ini)
|
|
station=$seedlink.station.id
|
|
|
|
* Use the command 'serial_plugin -m' to find out which protocols are
|
|
* supported.
|
|
protocol=dr24
|
|
|
|
* Serial port
|
|
port=$sources.dr24.comport
|
|
|
|
* Baud rate
|
|
bps=$sources.dr24.baudrate
|
|
|
|
* lsb (defaults to 8): least significant bit (relative to 32-bit samples),
|
|
* normally 8 for 24-bit samples, but can be set for example to 7 to get
|
|
* 25-bit samples;
|
|
* statusinterval (defaults to 0): time interval in minutes when "state of
|
|
* health" information is logged, 0 means "disabled". State of health
|
|
* channels can be used independently of this option.
|
|
*
|
|
* If you set 'checksum' to a wrong value then the driver will not work and
|
|
* you will get error messages like "bad SUM segment" or "bad MOD segment".
|
|
lsb=8
|
|
statusinterval=60
|
|
|
|
* Parameter 'time_offset' contains the amount of microseconds to be added
|
|
* to the time reported by the digitizer.
|
|
|
|
* 1.389 sec is possibly the correct offset if you have a version of the
|
|
* Earth Data digitizer with external GPS unit.
|
|
* time_offset=1389044
|
|
|
|
* Maximum number of consecutive zeros in datastream before data gap will be
|
|
* declared (-1 = disabled).
|
|
zero_sample_limit = -1
|
|
|
|
* Default timing quality in percents. This value will be used when no
|
|
* timing quality information is available. Can be -1 to omit the blockette
|
|
* 1001 altogether.
|
|
default_tq = 0
|
|
|
|
* Timing quality to use when GPS is out of lock
|
|
unlock_tq = 10
|
|
|
|
* Keyword 'channel' is used to map input channels to symbolic channel
|
|
* names. Channel names are arbitrary 1..10-letter identifiers which should
|
|
* match the input names of the stream processing scheme in streams.xml,
|
|
* which is referenced from seedlink.ini
|
|
|
|
channel Z source_id=0
|
|
channel E source_id=1
|
|
channel N source_id=2
|
|
|
|
* "State of health" channels
|
|
|
|
channel S0 source_id=16
|
|
channel S1 source_id=17
|
|
channel S2 source_id=18
|
|
channel S3 source_id=19
|
|
channel S4 source_id=20
|
|
channel S5 source_id=21
|
|
channel S6 source_id=22
|
|
channel S7 source_id=23
|
|
channel S8 source_id=24
|
|
* channel S9 source_id=25
|
|
|