global Custom magnitude for local events measured on horizontal components Custom magnitude for local events measured on horizontal components Regionalized calibration parameters for MLc. The region itself is defined by another magnitude-type MLc profile. Add one profile for every region. The profile name equals the name of a polygon configured in the BNA file of the Magnitude-type profile. The Magnitude-type profile and the polygon must exist. The special name "world" corresponds to the region of the entire planet as a fallback. Parameters for A0, non-parametric magnitude calibration. Overrides the calibration function log10(A0) for computing MLc per region. See logA0 description in the bindings. Parameters for parametric magnitude calibration: MLc = log10(A) + c3 * log10(r/c5) + c2 * (r + c4) + c1 + c0(station) Overrides the calibration parameter c0 for computing MLc per region. See c0 description in the bindings. Overrides the calibration parameter c1 for computing MLc per region. See c1 description in the bindings. Overrides the calibration parameter c2 for computing MLc per region. See c2 description in the bindings. Overrides the calibration parameter c3 for computing MLc per region. See c3 description in the bindings. Overrides the calibration parameter c4 for computing MLc per region. See c4 description in the bindings. Overrides the calibration parameter c5 for computing MLc per region. See c5 description in the bindings. Custom magnitude for local events measured on horizontal components Parameters for measuring MLc amplitudes. Add more parameters by adding an amplitude type profile 'MLc', The filter applied to raw records before applying Wood-Anderson simulation. Applying Wood-Anderson simulation. To achieve displacement records without WA simulation, an integration filter can be applied with the pre-filter. Scaling value multiplied to the measured amplitudes to match the amplitude units expected by the magnitude calibration function. Expected amplitudes are in units of mym but actual amplitudes provided from Wood-Anderson-corrected seismograms are in units of mm: amplitudeScale = 1000. If data are not corrected for WA, measured amplitudes take the unit of gain-corrected data considering the preFilter: amplitudeScale converts between units of measured and excpected amplitude. Type for measuring amplitudes. Available: AbsMax: absolute maximum MinMax: half difference between absolute maximum and minimum PeakTrough: half difference between maximum and minimum on a half cycle Define how to combine the amplitudes measured on both horizontals components: min: take the minimum max: take the maxium avgerage: form the average geometric_mean: form the geometric mean Parameters for computing MLc magnitudes from MLc amplitudes. Considered distance measure between source and receiver. Possible values are hypocentral: hypocentral distance epicentral: epicentral The minimum distance for computing magnitudes from amplitudes. Negative values deactivate the check. The maximum distance for computing magnitudes from amplitudes. Negative values deactivate the check. The maximum depth up to which magnitudes are computed. Type of magnitude calibration formula to be considered. The calibration parameters are considered accordingly. Currently supported are "parametric": consider parameters of parametric configuration in parametric section "A0": consider parameters of non-parametric configuration in A0 section. Parameters for A0, non-parametric magnitude calibration. Considered if magnitude.MLc.calibrationType = "A0". The non-parametric calibration function log10(A0). Format: any list of distance-value pairs separated by comma. Values within pairs are separated by colon. Example: "0:-1.3,60:-2.8,100:-3.0,400:-4.5,1000:-5.85" specifies 4 distance intervals from 0...60, 60...100, 100...400 and 400...1000 km distance. Within these intervals log10(A0) is interpolated linearly between -1.3...-2.8, -2.8...-3.0, -3.0...-4.5 and -4.5...-5.8, respectively. Note: The first and last distance samples limit the maximum distance range for computing MLv. Parameters for parametric magnitude calibration: MLc = log10(A) + c3 * log10(r/c5) + c2 * (r + c4) + c1 + c0(station) Considered if magnitude.MLc.calibrationType = "parametric". Station correction. This is the calibration value 'c0' applied in the magnitude calibration formula MLc = c0(station) + c1 + c2 * (r + c4) + c3 * log(r/c5) + log10(A) The calibration value 'c1' applied in the magnitude calibration formula MLc = c0(station) + c1 + c2 * (r + c4) + c3 * log(r/c5) + log10(A) The calibration value 'c2' applied in the magnitude calibration formula MLc = c0(station) + c1 + c2 * (r + c4) + c3 * log(r/c5) + log10(A) The calibration value 'c3' applied in the magnitude calibration formula MLc = c0(station) + c1 + c2 * (r + c4) + c3 * log(r/c5) + log10(A) The calibration value 'c4' applied in the magnitude calibration formula MLc = c0(station) + c1 + c2 * (r + c4) + c3 * log(r/c5) + log10(A) The calibration value 'c4' applied in the magnitude calibration formula MLc = c0(station) + c1 + c2 * (r + c4) + c3 * log(r/c5) + log10(A)