# Send to the MAGNITUDE group
connection.primaryGroup = MAGNITUDE

# Receive objects from PICK, AMPLITUDE and LOCATION group
connection.subscriptions = PICK, AMPLITUDE, LOCATION

# Interval between 2 sending processes. The interval has influence how often
# information is updated.
sendInterval = 1

# The minimum weight of an arrival to be used for magnitude
# calculations.
minimumArrivalWeight = 0.5

# Defines the types of magnitudes to calculate.
# A magnitude of a given type is going to be calculated
# only when a corresponding amplitude exists. Check
# the amplitudes calculated by scautopick and scamp also.
magnitudes = MLv, mb, mB, Mwp

# Defines the average method to use when computing
# the network magnitude. To define the average method
# per magnitude type append the type, eg:
# magnitudes.average = default, MLv:median
# The default behaviour is to compute the mean if less
# than 4 contributed station magnitudes exist otherwise
# a trimmed mean of 25 percent is used.
magnitudes.average = default

# Enable/disable calculation of a summary magnitude
summaryMagnitude.enabled = true

# This is the minimum station magnitude required for any
# magnitude to contribute to the summary magnitude at all. If
# this is set to 4 then no magnitude with less than 4 station
# magnitudes is taken into consideration even if this results
# in no summary magnitude at all. For this reason, the
# default here is 1 but in a purely automatic system it should
# be higher, at least 4 is recommended.
summaryMagnitude.minStationCount = 1

# Define the type of the summary magnitude
summaryMagnitude.type = M

# Define the coefficients to calculate the weight
# of a magnitude:
#   weight = a*magStationCount+b
# Unnamed values define the default values
summaryMagnitude.coefficients.a = 0, Mw(mB):0.4, Mw(Mwp):0.4
summaryMagnitude.coefficients.b = 1, MLv:2, Mw(mB):-1, Mw(Mwp):-1

# Define the magnitudes to include into the the summary magnitude
# calculation
#summaryMagnitude.whitelist = ""
summaryMagnitude.blacklist = mB, Mwp