benjamin
/
seiscomp-training
1
0
Fork 0
Code Pull Requests Packages Projects Releases Wiki Activity
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
main
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'main'
${ noResults }
seiscomp-training/share/doc/seiscomp/html/_sources/apps/scwfparam.rst.txt

1328 lines
32 KiB
Plaintext
Raw Permalink Normal View History Unescape Escape

[installation] Initial commit with first config
1 year ago
.. highlight:: rst
.. _scwfparam:
#########
scwfparam
#########
**Waveform parametrization module.**
Description
===========
scwfparam is a SeisComP module that computes
- peak ground acceleration (PGA)
- peak ground velocity (PGV)
- relative displacement elastic response spectrum (DRS)
- pseudo absolute acceleration elastic response spectrum (PSA)
in real-time or offline. It includes a process scheduler and handles
reprocessing of data in a smart way. It supports ShakeMap XML output as
documented in the
`ShakeMap manual <http://pubs.usgs.gov/tm/2005/12A01/pdf/508TM12-A1.pdf>`_ each
time a new set of data is available.
Scheduling
==========
When the module is not started in offline mode, the processing of events is
scheduled following the configured rules. Parameters that influence the
scheduling are:
- :confval:`wfparam.cron.wakeupInterval`
- :confval:`wfparam.cron.updateDelay`
- :confval:`wfparam.cron.delayTimes`
The wake-up interval specifies when the scheduler is called to check if a
process is about to be started or stopped. The default is 10 seconds.
The scheduler checks then all scheduled jobs, adds a job to the processing queue
if the next run time is not in the future and removes all scheduled jobs with
timestamps in the past. The process queue contains all jobs that are about to
be executed. Because waveform acquisition is a time- and memory-costly operation
only one process can run at a time. Once a process finished, the next process in
the queue is executed (if any). When a process is started, it fetches the latest
event parameters (origin time, magnitude, location).
To add processes to the scheduler, the module distinguishes two cases:
1. Process creation (new event or updated event seen the first time)
2. Process update (event updates after an process has been created)
Process creation
----------------
When a new event or an event update is received which does not have an
associated process yet, a new process is created. The event
time (Origin[Event.preferredOriginID].time) is used to build the default
schedule according to :confval:`wfparam.cron.delayTimes`.
.. code-block:: py
for each time in wfparam.cron.delayTimes:
add_cron_job(process, Origin[Event.preferredOriginID].time + time)
Process update
--------------
If a process for an event already exists, the next run time is the current time
plus wfparam.cron.updateDelay. Before adding this job to the scheduler the
application checks if the next scheduled runtime is at least
:confval:`wfparam.cron.updateDelay` seconds after the new run time. If not, a
new job is not addded to the scheduler. Pseudo code to illustrate the strategy
is given below.
.. code-block:: py
event_updated(event):
p = process_for_event(event)
# The schedule for process p could be {T1,T2,T3,T4}
now = get_current_time()
next_run = now + wfparam.cron.updateDelay
# Process currently suspended?
if isEmpty(p.schedule):
p.schedule.add(next_run)
elif (p.schedule[0] - next_run) > wfparam.cron.updateDelay:
p.schedule.prepend(next_run)
else:
# Do nothing, ignore the event update
pass
Processing
==========
The processing can be divided into the following steps:
- Collect all stations within the configured maximum distance
(:confval:`wfparam.maximumEpicentralDistance` or
:confval:`wfparam.magnitudeDistanceTable`)
- Remove already processed channels
- Find the velocity and acceleration stream with the highest sampling frequency
- The sensor unit is used to distinguish between velocity and acceleration
streams (M/S, M/S**2)
- Use all allowed components (:confval:`wfparam.streams.whitelist`,
:confval:`wfparam.streams.blacklist`) of each stream
- Compute expected P arrival time if no pick is available
- Start waveform acquisition
- If the configured time window for one stream is complete, do (optional steps
are written italic)
- Check saturation depending on :confval:`wfparam.saturationThreshold`
- Search maximum raw value (in counts)
- Apply gain
- Check STA/LTA threshold 5 seconds around P
- *If velocity, differentiate data to acceleration*
- *Compute pre-event cut-off if enabled*
- Compute offset of pre-event time window
- *Compute signal duration and check for aftershocks*
- *Deconvolution using spectral division of FFT spectrum and transfer function*
- *Apply optional sensitivity correction filter (lo-, hi- or bandpass)*
- *Apply optional lo-pass, hi-pass or band-pass filter*
- Compute PGA/PGV
- Calculate response spectra
- If acquisition finished
- Collect all values (also recently processed values)
- Results from velocity streams are always preferred over acceleration
streams if both are available (eg. co-located stations)
- Generate ShakeMap event and station XML
- Unless :confval:`wfparam.output.shakeMap.maximumOfHorizontals` is set
to true all processed streams are included in XML
- Call ShakeMap script and pass eventID and event ID path
The channel is considered to be processed if the last step succeeded.
Waveform archival
=================
If :confval:`wfparam.output.waveforms.enable` is set to true all processed
waveforms are stored in the configured output directory
:confval:`wfparam.output.waveforms.path`. The naming convention of a channel
miniSEED file is:
[EventDateTime]_[net]_[sta]_[loc][cha]_[filter][order]_[freqs].mseed
If :confval:`wfparam.output.waveforms.withEventDirectory` is set to true, an
event directory with the eventID is created additionally where the channel
files are stored under.
Either:
.. code-block:: sh
/path/to/waveforms/file1.mseed
/path/to/waveforms/file2.mseed
...
or
.. code-block:: sh
/path/to/waveforms/eventid/file1.mseed
/path/to/waveforms/eventid/file2.mseed
...
The miniSEED file contains uncompressed float 4096 byte records.
Example:
================== ==============================================
Event time 2011-11-21 08:30:00 Network: CH
Station SNIB
Location _ _
Channel HGZ
Filter hi-pass
Order 2
Corner frequencies 0.025
Filename **20111121083000_CH_SNIB_HGZ_HP2_0.025.mseed**
================== ==============================================
Database
========
scwfparam can make use of the database schema extension for strong motion
parameters.
In order to prepare the database the extension schema must be applied. The
database schema is installed in :file:`share/db/wfparam/*.sql`. Login into the
database backend and source the .sql file corresponding to the used database
backend.
In order to enable :ref:`scmaster` to handle messages containing objects for
strong motion parameters load the dmsm (data model strong motion) plugin as
follows in scmaster.cfg:
.. code-block:: sh
plugins = ${plugins}, dmsm
:ref:`scmaster` must be restarted to activate the plugin.
To activate scwfparam to send messages with strong motion objects, set
.. code-block:: sh
wfparam.output.messaging = true
in scwfparam.cfg.
ShakeMaps
=========
The ShakeMap XML is generated according the documentation of version 3.5 if
:confval:`wfparam.output.shakeMap.enable` is set to true.
Below an example is given of an event XML and a station XML. The data was
generated from a playback and does **not** describe a **real event**.
Event XML
---------
.. code-block:: xml
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<!DOCTYPE earthquake SYSTEM "earthquake.dtd">
<earthquake id="gfz2011oasp" lat="38.916" lon="40.0711"
depth="10.3249" mag="5.80361" year="2011"
month="7" day="19" hour="14" minute="54"
second="21" timezone="GMT"
locstring="tst2011oasp / 38.916 / 40.0711"
/>
Station XML
-----------
.. code-block:: xml
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<!DOCTYPE earthquake SYSTEM "stationlist.dtd">
<stationlist created="" xmlns="ch.ethz.sed.shakemap.usgs.xml">
<station code="JMB" name="JMB" lat="42.467" lon="26.583">
<comp name="BHZ">
<acc value="0.0175823522" flag="0"/>
<vel value="0.0265134476" flag="0"/>
<psa03 value="0.0177551343" flag="0"/>
<psa10 value="0.0179450342" flag="0"/>
<psa30 value="0.0507100318" flag="0"/>
</comp>
</station>
<station code="BUD" name="BUD" insttype="STS-2/N"
lat="47.4836" lon="19.0239">
<comp name="BHZ">
<acc value="0.0018418704" flag="0"/>
<vel value="0.0012123935" flag="0"/>
<psa03 value="0.0019287320" flag="0"/>
<psa10 value="0.0033152716" flag="0"/>
<psa30 value="0.0027636448" flag="0"/>
</comp>
</station>
<station code="ANTO" name="ANTO" lat="39.868" lon="32.7934">
<comp name="BHZ">
<acc value="0.0322238962" flag="0"/>
<vel value="0.0250842840" flag="0"/>
<psa03 value="0.0326696355" flag="0"/>
<psa10 value="0.0621788884" flag="0"/>
<psa30 value="0.0903777107" flag="0"/>
</comp>
</station>
<station code="GNI" name="GNI" lat="40.148" lon="44.741">
<comp name="BHZ">
<acc value="0.0760558909" flag="0"/>
<vel value="0.0273735691" flag="0"/>
<psa03 value="0.0818660133" flag="0"/>
<psa10 value="0.1230812588" flag="0"/>
<psa30 value="0.1682284546" flag="0"/>
</comp>
</station>
</stationlist>
Examples
========
#. Running scwfparam offline with a multiplexed miniseed volume, an event xml
and an inventory xml file. A hi-pass filter of 0.1hz (10secs) is used.
Processing starts immediately and the application finishes when processing
is done. The scheduler is disabled in offline mode.
.. code-block:: sh
scwfparam --offline -I vallorcine.mseed \
--inventory-db vallorcine_inv.xml \
--ep vallorcine.xml -E "Vallorcine.2005.09.08" \
--lo-filter 0.1 --hi-filter 0
#. Running for a given event with scheduling enabled. Only the given event will
be processed.
.. code-block:: sh
scwfparam -I arclink://localhost:18001 -E gfz2011oeej \
-d mysql://sysop:sysop@localhost/seiscomp
#. For running in real-time it is enough to add the module to the client list
of the trunk package in seiscomp config.
#. Running with remote Arclink server
To use a remote Arclink server it is
enough to configure the record stream with -I:
.. code-block:: sh
scwfparam --offline -I vallorcine.mseed \
--inventory-db vallorcine_inv.xml \
--ep vallorcine.xml -E "Vallorcine.2005.09.08" \
-I "arclink://arclink.ethz.ch:18002"
Note that the default acquisition timeout of 30 seconds might not be enough
to get all the requested data. If necessary, increase the value with
parameter :confval:`wfparam.acquisition.initialTimeout`. This can also be
reached on command line:
.. code-block:: sh
scwfparam --offline -I vallorcine.mseed \
--inventory-db vallorcine_inv.xml \
--ep vallorcine.xml -E "Vallorcine.2005.09.08" \
-I "arclink://arclink.ethz.ch:18002" \
--wfparam.acquisition.initialTimeout=300
#. Running with remote Seedlink server
To use a remote Seedlink server it is enough to configure the record stream with -I:
.. code-block:: sh
scwfparam --offline -I vallorcine.mseed \
--inventory-db vallorcine_inv.xml \
--ep vallorcine.xml -E "Vallorcine.2005.09.08" \
-I "slink://geofon.gfz-potsdam.de:18000"
.. _scwfparam_configuration:
Module Configuration
====================
| :file:`etc/defaults/global.cfg`
| :file:`etc/defaults/scwfparam.cfg`
| :file:`etc/global.cfg`
| :file:`etc/scwfparam.cfg`
| :file:`~/.seiscomp/global.cfg`
| :file:`~/.seiscomp/scwfparam.cfg`
scwfparam inherits :ref:`global options<global-configuration>`.
.. confval:: wfparam.logfile
Default: ``@LOGDIR@/scwfparam-processing-info.log``
Type: *path*
The path to the processing info logfile.
.. confval:: wfparam.totalTimeWindowLength
Default: ``360``
Type: *int*
Unit: *s*
Default value of total time window length in seconds if
wfparam.magnitudeTimeWindowTable is not specified. This times window
includes wfparam.preEventWindowLength.
.. confval:: wfparam.magnitudeTimeWindowTable
Type: *list:string*
Magnitude dependent time window table. The format is
\"mag1:secs1, mag2:secs2, mag3:secs3\". If a magnitude falls
between two configured magnitudes the time window of the lower
magnitude is used then. No interpolation is performed. Magnitude
outside the configured range are clipped to the lowest\/highest value.
Example: \"3:100, 4:200, 5:300\"
.. confval:: wfparam.preEventWindowLength
Default: ``60``
Type: *int*
Unit: *s*
The pre event time window length in seconds.
.. confval:: wfparam.maximumEpicentralDistance
Default: ``400``
Type: *int*
Unit: *km*
The maximum epicentral distance in km of a station being considered
for processing. This value is used if wfparam.magnitudeDistanceTable
is not specified.
.. confval:: wfparam.magnitudeDistanceTable
Type: *list:string*
Analogue to wfparam.magnitudeTimeWindowTable but instead giving a
time window, the distance in km is specified.
Example: \"3:400, 4:450, 5:500\"
.. confval:: wfparam.saturationThreshold
Default: ``80``
Type: *double*
Unit: *%*
Relative saturation threshold in percent. If the absolute raw amplitude
exceeds X% of 2\*\*23 counts the station will be excluded from
processing. This assumes a 24bit datalogger.
.. confval:: wfparam.STAlength
Default: ``1``
Type: *double*
Unit: *s*
Specifies the STA length in seconds of the applied STA\/LTA check.
.. confval:: wfparam.LTAlength
Default: ``60``
Type: *double*
Unit: *s*
Specifies the LTA length in seconds of the applied STA\/LTA check.
.. confval:: wfparam.STALTAratio
Default: ``3``
Type: *double*
Specifies the minimum STALTA ratio to be reached to further process
a station.
.. confval:: wfparam.STALTAmargin
Default: ``5``
Type: *double*
Unit: *s*
Specifies the number of seconds around P to be used to check the STA\/LTA ratio.
.. confval:: wfparam.durationScale
Default: ``1.5``
Type: *double*
Defines the factor applied to the signigicant duration to define the
processing spetra time window. If that value is <\= 0 the totalTimeWindowLength
is used.
.. confval:: wfparam.dampings
Default: ``5``
Type: *list:double*
Unit: *%*
Specifies a list of damping values \(in percent\) for computation of
the relative displacement elastic response spectrum.
Example: \"5,10,15\"
.. confval:: wfparam.naturalPeriods
Default: ``100``
Type: *int*
Specifies the number of natural periods for computation of the
relative displacement elastic response spectrum between Tmin and Tmax.
If fixed is given then a fixed list of periods is used.
.. confval:: wfparam.Tmin
Default: ``0``
Type: *double*
Unit: *s*
Specifies the minimum period \(Tmin\) in seconds for computation of the
relative displacement elastic response spectrum.
.. confval:: wfparam.Tmax
Default: ``5``
Type: *double*
Unit: *s*
Specifies the maximum period \(Tmax\) in seconds for computation of the
relative displacement elastic response spectrum.
.. confval:: wfparam.clipTmax
Default: ``true``
Type: *boolean*
Should the maximum period \(Tmax\) clipped against the
configured filter lower corner frequency, the maximum of
pd.loFreq or filter.loFreq.
.. confval:: wfparam.afterShockRemoval
Default: ``true``
Type: *boolean*
Enables\/disables aftershock removal \(Figini, 2006; Paolucci et al., 2008\)
.. confval:: wfparam.eventCutOff
Default: ``true``
Type: *boolean*
Enables\/disables pre\-event cut\-off. A hardcoded sta\/lta algorithm
\(with sta\=0.1s, lta\=2s, sta\/lta threshold\=1.2\) is run on the time
window defined by \(expected_P_arrival_time \- 15 s\). The pre\-event
window is hence defined as
[t\(sta\/lta \=1.2\) \- 15.5s, t\(sta\/lta \=1.2\) \- 0.5s].
.. confval:: wfparam.magnitudeFilterTable
Default: ``0:0.2;0.8fNyquist,3:0.1;0.8fNyquist,5:0.05;0.8fNyquist,7:0.025;0.8fNyquist``
Type: *list:string*
*No description available*
.. confval:: wfparam.deconvolution
Default: ``true``
Type: *boolean*
Enables\/disables deconvolution. If a channel does not provide full
response information it is not used for processing.
.. confval:: wfparam.magnitudeTolerance
Default: ``0.5``
Type: *double*
Defines the magnitude tolerance to completely reprocess an event with
respect to the last state.
.. note::
**wfparam.streams.\***
*Defines the white- and blacklist of data streams to be used. The*
*rules to decide if a stream is used or not are the following:*
**
*1. if whitelist is not empty and the stream is not on the whitelist,*
*don't use it, ok otherwise*
**
*2. if blacklist is not empty and the stream is on the blacklist,*
*don't use it, ok otherwise*
**
*Both checks are made and combined with AND. Either whitelist or*
*blacklist contains a list of patterns (wildcard allowed as * and ?),*
*eg GE.*.*.*, *, GE.MORC.*.BH? Each stream id (NET.STA.LOC.CHA) will*
*be checked against the defined patterns.*
.. confval:: wfparam.streams.whitelist
Type: *list:string*
The stream whitelist
.. confval:: wfparam.streams.blacklist
Type: *list:string*
The stream blacklist
.. confval:: wfparam.naturalPeriods.log
Default: ``false``
Type: *boolean*
Defines if a linear spacing or logarithmic spacing between Tmin and
Tmax is used. The default is a linear spacing. The logarithmic
spacing will fail if either Tmin or Tmax is 0.
.. note::
**wfparam.filter.\***
*Parameters of the 1st stage filter.*
.. confval:: wfparam.filter.order
Default: ``4``
Type: *int*
Specifies the order of the 1st stage filter.
.. confval:: wfparam.filter.loFreq
Default: ``0.025``
Type: *double*
Specifies the frequency of the 1st stage hi\-pass filter. If this
parameter is equal to 0 the hi\-pass filter is not used.
If suffix \"fNyquist\" is used then the value is multiplied
by the Nyquist frequency of the data to get the final corner
frequency of the filter.
.. confval:: wfparam.filter.hiFreq
Default: ``40``
Type: *double*
Specifies the frequency of the 1st stage lo\-pass filter. If this
parameter is equal to 0 the lo\-pass filter is not used.
If suffix \"fNyquist\" is used then the value is multiplied
by the Nyquist frequency of the data to get the final corner
frequency of the filter.
.. note::
**wfparam.pd.\***
*Parameters of the post-deconvolution filter applied in the*
*frequency domain.*
.. confval:: wfparam.pd.order
Default: ``4``
Type: *int*
Specifies the order of the 2nd stage filter.
.. confval:: wfparam.pd.loFreq
Default: ``0``
Type: *double*
Specifies the frequency of the 2nd stage hi\-pass filter. If this
parameter is equal to 0 the hi\-pass filter is not used.
If suffix \"fNyquist\" is used then the value is multiplied
by the Nyquist frequency of the data to get the final corner
frequency of the filter.
.. confval:: wfparam.pd.hiFreq
Default: ``0``
Type: *double*
Specifies the frequency of the 2nd stage lo\-pass filter. If this
parameter is equal to 0 the lo\-pass filter is not used.
If suffix \"fNyquist\" is used then the value is multiplied
by the Nyquist frequency of the data to get the final corner
frequency of the filter.
.. confval:: wfparam.filtering.noncausal
Default: ``false``
Type: *boolean*
Enables non\-causal filtering in the frequency domain.
.. confval:: wfparam.filtering.taperLength
Default: ``-1``
Type: *double*
Unit: *s*
Defines the cosine taper length in seconds if non\-causal filters
are activated applied on either side of the waveform. If a
negative length is given 10 percent of the pre\-event window length
is used on either side of the waveform.
.. confval:: wfparam.filtering.padLength
Default: ``-1``
Type: *double*
Unit: *s*
The length of the zero padding window in seconds applied on either
side of the waveform if non\-causal filters are activated. If
negative, it is computed following Boore \(2005\) as
1.5\*order\/corner_freq and applied half at the beginning and half at
the end of the waveform.
.. confval:: wfparam.cron.wakeupInterval
Default: ``10``
Type: *int*
Unit: *s*
Specifies the interval in seconds to check\/start scheduled operations.
.. confval:: wfparam.cron.eventMaxIdleTime
Default: ``3600``
Type: *int*
Unit: *s*
Specifies the maximum allowed idle time of a process before removed.
The idle time is calculated if no further processing is scheduled
and computes as: [now]\-lastRun.
.. confval:: wfparam.cron.logging
Default: ``true``
Type: *boolean*
Enables\/disables updating of a cron log file. This file will be
created at \~\/.seiscomp\/log\/[appname].sched
and contains information about the scheduled events and the
processing queue. The file is updated each n seconds,
where n \= wfparam.cron.wakeupInterval.
.. confval:: wfparam.cron.updateDelay
Default: ``60``
Type: *int*
Specifies the delay in seconds to delay processing if a new
authoritative origin arrives for an event.
.. confval:: wfparam.cron.delayTimes
Type: *list:int*
Specifies a list of delay times in seconds relative to event time
to trigger the processing. When the first origin of an event arrives
this list is used to construct the crontab for this event.
Example: \"60, 120, 300, 3600\"
.. confval:: wfparam.acquisition.initialTimeout
Default: ``30``
Type: *int*
Unit: *s*
Specifies the initial acquisition timeout. If the acquisition
source \(e.g. Arclink\) does not respond within this threshold with
waveforms, the request is discarded.
.. confval:: wfparam.acquisition.runningTimeout
Default: ``2``
Type: *int*
Unit: *s*
Specifies the acquisition timeout when waveforms are being
transfered. If no new waveforms arrive within this threshold, the
request is aborted. This is important if a Seedlink connection is
configured which can block the application for a very long time if
at least one requested channel has no data. Seedlink does not
finished the request until all data has been sent. When data will
arrive for a particular channel is not known.
.. confval:: wfparam.output.messaging
Default: ``false``
Type: *boolean*
Enables messaging output which creates objects of the
StrongMotionParameters data model extension \(defined by SED\) and
sends them to scmaster. In order to save the objects to the database,
scmaster needs to load the dmsm plugin and the corresponding database
schema must be applied.
The default message group is AMPLITUDE. To change this group redefine
connection.primaryGroup.
.. confval:: wfparam.output.shortEventID
Default: ``false``
Type: *boolean*
Uses short event ids when an event output directory needs to be
created. The default pattern is [eventtime]_[mag]_[lat]_[lon]_[updatetime].
The short format just contains the first part, namely [eventtime] in
the format YEARmmddHHMMSS.
.. confval:: wfparam.output.waveforms.enable
Default: ``false``
Type: *boolean*
Enables\/disables the output of processed waveforms.
.. confval:: wfparam.output.waveforms.path
Default: ``@LOGDIR@/shakemaps/waveforms``
Type: *string*
Specifies the waveform output path. This parameter is only used if
wfparam.output.waveforms.enable is true.
.. confval:: wfparam.output.waveforms.withEventDirectory
Default: ``false``
Type: *boolean*
Enables\/disables the creation of an event directory \(named with
eventID\) when storing the processed waveforms. This parameter is
only used if wfparam.output.waveforms.enable is true.
.. confval:: wfparam.output.spectra.enable
Default: ``false``
Type: *boolean*
Enables\/disables the output of spectra \(psa, drs\). The output
format is a simple ASCII file where the first column is the
period and the second column the corresponding value.
.. confval:: wfparam.output.spectra.path
Default: ``@LOGDIR@/shakemaps/spectra``
Type: *string*
Specifies the spectra output path. This parameter is only used if
wfparam.output.spectra.enable is true.
.. confval:: wfparam.output.spectra.withEventDirectory
Default: ``false``
Type: *boolean*
Enables\/disables the creation of an event directory \(named with
eventID\) when storing the spectra. This parameter is only used if
wfparam.output.spectra.enable is true.
.. confval:: wfparam.output.shakeMap.enable
Default: ``true``
Type: *boolean*
Enables\/disables ShakeMap XML output.
.. confval:: wfparam.output.shakeMap.path
Default: ``@LOGDIR@/shakemaps``
Type: *string*
Specifies the ShakeMap XML output path. This is only used if
wfparam.output.shakeMap.enable is set to true.
.. confval:: wfparam.output.shakeMap.script
Type: *string*
Specifies the path to a script that is called whenever a new
ShakeMap XML is available. The script is called with 3 parameters:
EventID, modified ShakeMap eventID, path to event directory \(where
input\/event.xml and input\/event_dat.xml lives\).
The event files are not deleted by the application. The ownership
goes to the called script.
.. confval:: wfparam.output.shakeMap.synchronous
Default: ``true``
Type: *boolean*
Enables\/disables synchronous or asynchronous script calls. If
enabled, be careful to not spend too much time in the script.
The application is blocked while the script is running.
.. confval:: wfparam.output.shakeMap.maximumOfHorizontals
Default: ``false``
Type: *boolean*
If enabled the maximum PGV, PGA, PSA03, PSA10 and PSA30 of both
horizontal components is used in the final output. Otherwise each
component is saved.
.. confval:: wfparam.output.shakeMap.SC3EventID
Default: ``false``
Type: *boolean*
Uses the SeisComP event publicID as id attribute of the
earthquake tag, a generated ShakeMapID otherwise.
.. confval:: wfparam.output.shakeMap.regionName
Default: ``false``
Type: *boolean*
Uses the event region name \(if available\) for the locstring
attribute, the publicID, lat, lon otherwise.
.. confval:: wfparam.output.shakeMap.encoding
Default: ``UTF-8``
Type: *string*
The XML encoding string written to the Shakemap XML file.
.. confval:: wfparam.output.shakeMap.version
Default: ``3``
Type: *int*
The target version of the Shakemap input files.
Bindings Parameters
===================
.. confval:: amplitudes.PGAV.saturationThreshold
Type: *string*
Defines the saturation threshold for the optional saturation check.
By default the saturation check is configured for all stations
as module parameter. This parameters overrides the threshold
per station.
This value can either be an absolute value such as \"100000\"
or a relative value \(optionally in percent\) with respect to
the number of effective bits, e.g. \"0.8\@23\" or
\"80%\@23\". The first version uses 1\*\*23 \* 0.8
whereas the latter uses 1\*\*23 \* 80\/100.
The special value \"false\" explicitly disables
the check.
Command-Line Options
====================
.. program:: scwfparam
Generic
-------
.. option:: -h, --help
Show help message.
.. option:: -V, --version
Show version information.
.. option:: --config-file arg
Use alternative configuration file. When this option is
used the loading of all stages is disabled. Only the
given configuration file is parsed and used. To use
another name for the configuration create a symbolic
link of the application or copy it. Example:
scautopick \-> scautopick2.
.. option:: --plugins arg
Load given plugins.
.. option:: -D, --daemon
Run as daemon. This means the application will fork itself
and doesn't need to be started with \&.
.. option:: --auto-shutdown arg
Enable\/disable self\-shutdown because a master module shutdown.
This only works when messaging is enabled and the master
module sends a shutdown message \(enabled with \-\-start\-stop\-msg
for the master module\).
.. option:: --shutdown-master-module arg
Set the name of the master\-module used for auto\-shutdown.
This is the application name of the module actually
started. If symlinks are used, then it is the name of
the symlinked application.
.. option:: --shutdown-master-username arg
Set the name of the master\-username of the messaging
used for auto\-shutdown. If \"shutdown\-master\-module\" is
given as well, this parameter is ignored.
.. option:: -x, --expiry hours
Time span in hours after which objects expire
.. option:: -E, --event-id arg
EventID to calculate amplitudes for
.. option:: --ep arg
EventParameters \(XML\) to load
Verbosity
---------
.. option:: --verbosity arg
Verbosity level [0..4]. 0:quiet, 1:error, 2:warning, 3:info,
4:debug.
.. option:: -v, --v
Increase verbosity level \(may be repeated, eg. \-vv\).
.. option:: -q, --quiet
Quiet mode: no logging output.
.. option:: --component arg
Limit the logging to a certain component. This option can
be given more than once.
.. option:: -s, --syslog
Use syslog logging backend. The output usually goes to
\/var\/lib\/messages.
.. option:: -l, --lockfile arg
Path to lock file.
.. option:: --console arg
Send log output to stdout.
.. option:: --debug
Execute in debug mode.
Equivalent to \-\-verbosity\=4 \-\-console\=1 .
.. option:: --log-file arg
Use alternative log file.
Messaging
---------
.. option:: -u, --user arg
Overrides configuration parameter :confval:`connection.username`.
.. option:: -H, --host arg
Overrides configuration parameter :confval:`connection.server`.
.. option:: -t, --timeout arg
Overrides configuration parameter :confval:`connection.timeout`.
.. option:: -g, --primary-group arg
Overrides configuration parameter :confval:`connection.primaryGroup`.
.. option:: -S, --subscribe-group arg
A group to subscribe to.
This option can be given more than once.
.. option:: --content-type arg
Overrides configuration parameter :confval:`connection.contentType`.
.. option:: --start-stop-msg arg
Set sending of a start and a stop message.
.. option:: --test
Test mode, no messages are sent
Database
--------
.. option:: --db-driver-list
List all supported database drivers.
.. option:: -d, --database arg
The database connection string, format:
service:\/\/user:pwd\@host\/database.
\"service\" is the name of the database driver which
can be queried with \"\-\-db\-driver\-list\".
.. option:: --config-module arg
The config module to use.
.. option:: --inventory-db arg
Load the inventory from the given database or file, format:
[service:\/\/]location .
.. option:: --db-disable
Do not use the database at all
Records
-------
.. option:: --record-driver-list
List all supported record stream drivers.
.. option:: -I, --record-url arg
The recordstream source URL, format:
[service:\/\/]location[#type].
\"service\" is the name of the recordstream driver
which can be queried with \"\-\-record\-driver\-list\".
If \"service\" is not given, \"file:\/\/\" is
used.
.. option:: --record-file arg
Specify a file as record source.
.. option:: --record-type arg
Specify a type for the records being read.
Mode
----
.. option:: --order arg
Filter order
.. option:: --lo-filter freq
High\-pass filter frequency
.. option:: --hi-filter freq
Low\-pass filter frequency
.. option:: --sc-order arg
Sensitivity correction filter order
.. option:: --sc-lo-filter freq
Sensitivity correction high\-pass filter frequency
.. option:: --sc-hi-filter freq
Sensitivity correction low\-pass filter frequency
.. option:: --offline
Do not connect to the messaging and and disable the database in combination with \-\-inventory\-db and \-\-ep
.. option:: --force
Force event processing even if a journal entry exists that processing has completed
.. option:: --force-shakemap
Force ShakeMap script to be run even if no station has contributed data
.. option:: --dump-config
Dump the configuration and exit
.. option:: --dump-records
Dumps all received records \(binary\) to [eventd].recs