[texas] Add tuned parameters

etc/scanloc.cfg

@@ -0,0 +1,64 @@
+# Set the logging level between 1 and 4 where 1=ERROR, 2=WARNING, 3=INFO and
+# 4=DEBUG.
+logging.level = 4
+
+# Maximum depth of an origin to be sent.
+# Note: A similar parameter may require configuration for score plugins.
+ignoreDepth = 400.0
+
+# Minimum score of an origin to be sent.
+minScore = 6
+
+# Time to keep picks. Time comparison is based on the pick times. In non-real
+# time playbacks the time to keep picks is usually compressed.
+buffer.pickKeep = 60.0
+
+# Time to keep origins. Time comparison is based on the origin times. In
+# non-real time playbacks the time to keep orgins is usually compressed.
+buffer.originKeep = 60.0
+
+# Maximum allowed difference between considered picks and cluster reference
+# time (latest pick time). Optimum values can be derived from travel times.The
+# cluster search ignores all picks which exceed the value. Using "-1" enables
+# all picks regardless of the delay.
+clusterSearch.maxPickDelay = 20
+
+# Average velocity used for distance calculation.
+clusterSearch.averageVelocity = 5
+
+# Maximum allowed distance over all core points and maximum allowed distance
+# for neighborhood search. Both account for travel-time difference,
+# inter-station distance and the configured averageVelocity.
+clusterSearch.maxSearchDist = 20
+
+# Check, if derived origins fulfill the cluster search criteria anymore.
+# Activating this option may lower the number of events and suppress fake
+# events.
+clusterSearch.checkOrigins = true
+
+# Maximum distance from origin to stations for associating P and S picks.
+association.maxDist = 150.0
+
+# Maximum allowed difference between measured and predicted arrival times for
+# associating P phases to origin. Larger values allow significant correction of
+# initial locations.
+association.maxPResidual = 2
+
+# Maximum allowed difference between measured and predicted arrival time for
+# associating S phases to origins. Larger values allow significant correction
+# of initial locations.
+association.maxSResidual = 2
+
+# Maximum allowed time residuals of picks after association and relocation.
+# Picks will be removed at exceedence starting with largest residual and
+# origins will be relocated.
+association.maxResidual = 1
+
+# Name of travel-time table used for phase association. May be different from
+# locator profile. Using a different table/profile may result in increased
+# runtime.
+association.table = iasp91_scanloc
+
+# The locator profile to be used. Using a different profile/table for locating
+# and associating may result in increased runtime.
+locator.profile = iasp91_scanloc