[texas] Add tuned parameters

etc/key/scautopick/profile_texas

@@ -0,0 +1,57 @@
+# Override the relative data acquisition time (relative to the triggering
+# pick). This adds a margin to the actual processing and is useful to
+# initialize the filter (Example: bandpass). The data is not used at all until
+# signalBegin is reached. The data time window start is the minimum of
+# noiseBegin and signalBegin.
+picker.AIC.noiseBegin = -10
+
+# Override the default time (relative to the trigger time) of the begin of the
+# signal window used to pick.
+picker.AIC.signalBegin = -3
+
+# Override the default time (relative to the trigger time) of the begin of the
+# signal window used to pick.
+picker.AIC.signalEnd = 0.5
+
+# Override the default filter which is "raw". The typical filter grammar can be
+# used.
+picker.AIC.filter = "RMHP(5)>>ITAPER(3)>>BW(3,3,-0.4)"
+
+# Mininum SNR as returned from AIC for accepting picks.
+picker.AIC.minSNR = 3
+
+# Start time of the signal processing relative to the triggering P pick. This
+# adds a margin to the actual processing and is useful to initialize the filter
+# (e.g. STALTA). The data is not used at all for detection until signalBegin is
+# reached.
+spicker.AIC.noiseBegin = -10
+
+# Start time of the S-phase detector relative to the triggering P pick.
+# Delaying the detector ignores P-coda and early signals, e.g. due to P-S phase
+# conversions at shallow depths.
+spicker.AIC.signalBegin = 0.3
+
+# End time of the S-phase detector relative to the triggering P pick.
+spicker.AIC.signalEnd = 5
+
+# Filter applied on the raw horizontal traces to compute the L2 trace. As a
+# minimum remove offsets. S-AIC-V, filters the raw vertical trace computing the
+# filtered vertical trace.
+spicker.AIC.filter = "RMHP(1)>>ITAPER(2)>>BW(3,3,15)"
+
+# The AIC time window stepping in seconds. For every step the window is
+# expanded by step and the AIC is computed.
+spicker.AIC.step = 0.3
+
+# Mininum SNR as returned from AIC for accepting a detection.
+spicker.AIC.minSNR = 5
+
+# Minimum number of hits for a particular pick time when the running AIC is
+# computed for accepting a detection.
+spicker.AIC.minCnt = 3
+
+# Defines the filter to be used for picking.
+detecFilter = "RMHP(5)>>ITAPER(1)>>BW(3,5,-0.4)>>STALTA(0.2,10)"
+
+# The time correction applied to a pick.
+timeCorr = 0