[seiscomp, scanloc] Install, add .gitignore

share/templates/seedlink/sadc/plugins.ini.tpl

@@ -0,0 +1,69 @@
+* Generated at $date - Do not edit!
+* template: $template
+
+[$seedlink.source.id]
+
+* Settings for SADC10/18/20/30 digitizer
+
+* Station ID (network/station code is set in seedlink.ini)
+station=$seedlink.station.id
+
+* Use the command 'serial_plugin -m' to find out which protocols are
+* supported.
+protocol=sadc
+
+* Serial port 
+port=$sources.sadc.comport
+
+* Baud rate
+bps=$sources.sadc.baudrate
+
+* Use PC clock for initial time setting.
+pctime=$sources.sadc.pctime
+
+* Parameter 'time_offset' contains the amount of microseconds to be added
+* to the time reported by the digitizer.
+
+* 1.389 sec is possibly the correct offset if you have a version of the
+* Earth Data digitizer with external GPS unit.
+* time_offset=1389044
+
+* Maximum number of consecutive zeros in datastream before data gap will be
+* declared (-1 = disabled).
+zero_sample_limit = -1
+
+* Default timing quality in percents. This value will be used when no
+* timing quality information is available. Can be -1 to omit the blockette
+* 1001 altogether.
+default_tq = 0
+
+* Timing quality to use when GPS is out of lock
+unlock_tq = 10
+
+* Keyword 'channel' is used to map input channels to symbolic channel
+* names. Channel names are arbitrary 1..10-letter identifiers which should
+* match the input names of the stream processing scheme in streams.xml,
+* which is referenced from seedlink.ini
+
+channel Z source_id=0
+channel N source_id=1
+channel E source_id=2
+
+channel Z1 source_id=3
+channel N1 source_id=4
+channel E1 source_id=5
+
+* Remaining channels of the 16-channel digitizer are defined as auxiliary
+* channels (100 sps, downsampled to 1 sps)
+
+channel S0 source_id=6
+channel S1 source_id=7
+channel S2 source_id=8
+channel S3 source_id=9
+channel S4 source_id=10
+channel S5 source_id=11
+channel S6 source_id=12
+channel S7 source_id=13
+channel S8 source_id=14
+channel S9 source_id=15
+