[seiscomp, scanloc] Install, add .gitignore

share/templates/seedlink/ps2400_eth/plugins.ini.tpl

@@ -0,0 +1,79 @@
+* Generated at $date - Do not edit!
+* template: $template
+
+[$seedlink.source.id]
+
+* Settings for the Earth Data PS2400/PS6-24 digitizer (firmware >= 2.23)
+
+* Station ID (network/station code is set in seedlink.ini)
+station=$seedlink.station.id
+
+* Use the command 'serial_plugin -m' to find out which protocols are
+* supported.
+protocol=edata_r
+
+* Port can be a serial port, pipe or "tcp://ip:port"
+port=tcp://$sources.ps2400_eth.address:$sources.ps2400_eth.port
+
+* Baud rate is only meaningful for a serial port.
+bps=0
+
+* lsb (defaults to 8): least significant bit (relative to 32-bit samples),
+*   normally 8 for 24-bit samples, but can be set for example to 7 to get
+*   25-bit samples;
+* statusinterval (defaults to 0): time interval in minutes when "state of
+*   health" information is logged, 0 means "disabled". State of health
+*   channels can be used independently of this option.
+lsb=8
+statusinterval=60
+
+* Parameter 'time_offset' contains the amount of microseconds to be added
+* to the time reported by the digitizer.
+
+* 1.389 sec is possibly the correct offset if you have a version of the
+* Earth Data digitizer with external GPS unit.
+* time_offset=1389044
+
+* Maximum number of consecutive zeros in datastream before data gap will be
+* declared (-1 = disabled).
+zero_sample_limit = -1
+
+* Default timing quality in percents. This value will be used when no
+* timing quality information is available. Can be -1 to omit the blockette
+* 1001 altogether.
+default_tq = 0
+
+* Timing quality to use when GPS is out of lock
+unlock_tq = 10
+
+* Keyword 'channel' is used to map input channels to symbolic channel
+* names. Channel names are arbitrary 1..10-letter identifiers which should
+* match the input names of the stream processing scheme in streams.xml,
+* which is referenced from seedlink.ini
+
+
+channel Z source_id=0
+channel N source_id=1
+channel E source_id=2
+
+channel Z1 source_id=3
+channel N1 source_id=4
+channel E1 source_id=5
+
+* "State of health" channels (1 sps) have source IDs 6...19.
+* Which Mini-SEED streams (if any) are created from these channels
+* depends on the stream processing scheme.
+
+channel S1 source_id=6
+channel S2 source_id=7
+channel S3 source_id=8
+channel S4 source_id=9
+channel S5 source_id=10
+channel S6 source_id=11
+channel S7 source_id=12
+channel S8 source_id=13
+
+* Channel 20 records the phase difference between the incoming GPS 1pps
+* signal and the internal one second mark. One unit is 333 us.
+
+channel PLL source_id=20