[seiscomp, scanloc] Install, add .gitignore

share/templates/seedlink/minilogger/minilogger.prop.tpl

@@ -0,0 +1,93 @@
+#=========================================
+# section name (do not remove)
+[Logging]
+
+
+#--- Device path and name of port for USB Seismometer Interface. type=string default=/dev/usbdev1.1
+#   If the specified port cannot be opened or is not a USB Seismometer Interface device, all available ports
+#	will be scanned to find a USB Seismometer Interface device.
+#
+port_path_hint=$sources.minilogger.port_path_hint
+
+
+#--- Allow low-level setting of port interface attributes when available ports are scanned 
+#   to find a USB Seismometer Interface device, 0=NO, 1=Yes. type=int default=0
+#   Setting 1 (=Yes) may help successful detection and correct reading of the USB Seismometer Interface device,
+#   particularly for the RasberryPi (to set correct baud rate?), 
+#   but can have adverse effects on other devices, terminals, etc. open on the system.
+#
+allow_set_interface_attribs=$sources.minilogger.allow_set_interface_attribs
+
+
+#--- Sets a fixed sample rate to report in the miniseed file header. type=real; default=-1
+#   The default (value < 0.0) sets an estimated sample rate based on recent packet start times.
+#   This estimated sample rate will vary slightly over time, potentially producing errors in some
+#   software when reading the miniseed files.
+#   See also: [Station] nominal_sample_rate
+#
+#   For SEISMOMETER INTERFACE (USB) (CODE: SEP 064) use:
+#    nominal_sample_rate: mswrite_header_sample_rate
+#	  20: 20.032 SPS
+#	  40: 39.860 SPS
+#	  80: 79.719 SPS
+#
+mswrite_header_sample_rate=$sources.minilogger.mswrite_header_sample_rate
+
+
+#--- SEED data encoding type for writing miniseed files. type=string; default=DE_INT32
+#   Supported values are: DE_INT16, DE_INT32
+mswrite_data_encoding_type=DE_$sources.minilogger.mswrite_data_encoding_type
+
+
+
+#=========================================
+# section name (do not remove)
+[Station]
+
+
+#--- The code representing the network this station belongs to. type=string default=UK
+#
+station_network=$seedlink.station.network
+
+
+#--- Descriptive name for station. Used for AmaSeis server. type=string default=TEST
+#
+station_name=$seedlink.station.code
+
+
+#--- The initial letters to set for the miniseed header 'channel', will be prepended to the component. type=string default=BH
+#
+channel_prefix=$sources.minilogger.channel_prefix
+
+
+#--- Component of seismogram, one of Z, N or E. type=string default=Z
+#
+component=$sources.minilogger.component
+
+
+#--- Set sample rate and gain on SEP 064 device, 0=NO, 1=Yes. type=int default=0
+#--- For SEISMOMETER INTERFACE (USB) (CODE: SEP 064) can be one of 20, 40 or 80
+#
+#
+do_settings_sep064=$sources.minilogger.do_settings_sep064
+
+
+#--- Nominal sample rate per second. type=int default=20
+#    See also: [Logging] mswrite_header_sample_rate
+#
+#--- For SEISMOMETER INTERFACE (USB) (CODE: SEP 064) can be one of 20, 40 or 80
+#
+#
+nominal_sample_rate=$sources.minilogger.nominal_sample_rate
+
+
+#--- Nominal gain, one of 1, 2 or 4. type=int default=1
+#
+#--- For SEISMOMETER INTERFACE (USB) (CODE: SEP 064) can be 1, 2 or 4:
+#	   '1': x1 = 0.64uV/count
+#	   '2': x2 = 0.32uV/count
+#	   '4': x2 = 0.32uV/count
+#
+nominal_gain=$sources.minilogger.nominal_gain
+
+

share/templates/seedlink/minilogger/seedlink_plugin.tpl

@@ -0,0 +1,6 @@
+* template: $template
+plugin $seedlink.source.id cmd = "$seedlink.plugin_dir/minilogger_plugin -p $seedlink.config_dir/${seedlink.station.network}.${seedlink.station.code}.${sources.minilogger.channel_prefix}${sources.minilogger.component}.prop"
+             timeout = 600
+             start_retry = 60
+             shutdown_wait = 10
+

share/templates/seedlink/minilogger/setup.py

@@ -0,0 +1,49 @@
+import os
+
+'''
+Plugin handler for the minilogger plugin.
+'''
+class SeedlinkPluginHandler:
+  # Create defaults
+  def __init__(self): pass
+
+  def push(self, seedlink):
+    # Check and set defaults
+    try: seedlink.param('sources.minilogger.port_path_hint')
+    except: seedlink.setParam('sources.minilogger.port_path_hint', '/dev/ttyACM0')
+
+    try: seedlink.param('sources.minilogger.allow_set_interface_attribs')
+    except: seedlink.setParam('sources.minilogger.allow_set_interface_attribs', 1)
+
+    try: seedlink.param('sources.minilogger.mswrite_header_sample_rate')
+    except: seedlink.setParam('sources.minilogger.mswrite_header_sample_rate', '-1')
+
+    try: seedlink.param('sources.minilogger.mswrite_data_encoding_type')
+    except: seedlink.setParam('sources.minilogger.mswrite_data_encoding_type', 'STEIM2')
+
+    try:  seedlink.param('sources.minilogger.channel_prefix')
+    except: seedlink.setParam('sources.minilogger.channel_prefix', 'SH')
+
+    try: seedlink.param('sources.minilogger.component')
+    except: seedlink.setParam('sources.minilogger.component', 'Z')
+
+    try: seedlink.param('sources.minilogger.do_settings_sep064')
+    except: seedlink.setParam('sources.minilogger.do_settings_sep064', '1')
+
+    try: seedlink.param('sources.minilogger.nominal_sample_rate')
+    except: seedlink.setParam('sources.minilogger.nominal_sample_rate', '80')
+
+    try: seedlink.param('sources.minilogger.nominal_gain')
+    except: seedlink.setParam('sources.minilogger.nominal_gain', '4')
+
+    tag = seedlink.net + "." + seedlink.sta + "." + seedlink.param('sources.minilogger.channel_prefix') + seedlink.param('sources.minilogger.component')
+
+    fd = open(os.path.join(seedlink.config_dir, tag + ".prop"), "w")
+    fd.write(seedlink._process_template('minilogger.prop.tpl', 'minilogger'))
+    fd.close()
+
+    return tag
+
+  # Flush does nothing
+  def flush(self, seedlink):
+    pass