[seiscomp, scanloc] Install, add .gitignore

share/templates/seedlink/dr24/plugins.ini.tpl

@@ -0,0 +1,73 @@
+* Generated at $date - Do not edit!
+* template: $template
+
+[$seedlink.source.id]
+
+* Settings for Geotech DR24 digitizer
+
+* Station ID (network/station code is set in seedlink.ini)
+station=$seedlink.station.id
+
+* Use the command 'serial_plugin -m' to find out which protocols are
+* supported.
+protocol=dr24
+
+* Serial port 
+port=$sources.dr24.comport
+
+* Baud rate
+bps=$sources.dr24.baudrate
+
+* lsb (defaults to 8): least significant bit (relative to 32-bit samples),
+*   normally 8 for 24-bit samples, but can be set for example to 7 to get
+*   25-bit samples;
+* statusinterval (defaults to 0): time interval in minutes when "state of
+*   health" information is logged, 0 means "disabled". State of health
+*   channels can be used independently of this option.
+*
+* If you set 'checksum' to a wrong value then the driver will not work and
+* you will get error messages like "bad SUM segment" or "bad MOD segment".
+lsb=8
+statusinterval=60
+
+* Parameter 'time_offset' contains the amount of microseconds to be added
+* to the time reported by the digitizer.
+
+* 1.389 sec is possibly the correct offset if you have a version of the
+* Earth Data digitizer with external GPS unit.
+* time_offset=1389044
+
+* Maximum number of consecutive zeros in datastream before data gap will be
+* declared (-1 = disabled).
+zero_sample_limit = -1
+
+* Default timing quality in percents. This value will be used when no
+* timing quality information is available. Can be -1 to omit the blockette
+* 1001 altogether.
+default_tq = 0
+
+* Timing quality to use when GPS is out of lock
+unlock_tq = 10
+
+* Keyword 'channel' is used to map input channels to symbolic channel
+* names. Channel names are arbitrary 1..10-letter identifiers which should
+* match the input names of the stream processing scheme in streams.xml,
+* which is referenced from seedlink.ini
+
+channel Z source_id=0
+channel E source_id=1
+channel N source_id=2
+
+* "State of health" channels
+
+channel S0 source_id=16
+channel S1 source_id=17
+channel S2 source_id=18
+channel S3 source_id=19
+channel S4 source_id=20
+channel S5 source_id=21
+channel S6 source_id=22
+channel S7 source_id=23
+channel S8 source_id=24
+* channel S9 source_id=25
+