[seiscomp, scanloc] Install, add .gitignore

share/templates/seedlink/dr24/plugins.ini.tpl

@@ -0,0 +1,73 @@
+* Generated at $date - Do not edit!
+* template: $template
+
+[$seedlink.source.id]
+
+* Settings for Geotech DR24 digitizer
+
+* Station ID (network/station code is set in seedlink.ini)
+station=$seedlink.station.id
+
+* Use the command 'serial_plugin -m' to find out which protocols are
+* supported.
+protocol=dr24
+
+* Serial port 
+port=$sources.dr24.comport
+
+* Baud rate
+bps=$sources.dr24.baudrate
+
+* lsb (defaults to 8): least significant bit (relative to 32-bit samples),
+*   normally 8 for 24-bit samples, but can be set for example to 7 to get
+*   25-bit samples;
+* statusinterval (defaults to 0): time interval in minutes when "state of
+*   health" information is logged, 0 means "disabled". State of health
+*   channels can be used independently of this option.
+*
+* If you set 'checksum' to a wrong value then the driver will not work and
+* you will get error messages like "bad SUM segment" or "bad MOD segment".
+lsb=8
+statusinterval=60
+
+* Parameter 'time_offset' contains the amount of microseconds to be added
+* to the time reported by the digitizer.
+
+* 1.389 sec is possibly the correct offset if you have a version of the
+* Earth Data digitizer with external GPS unit.
+* time_offset=1389044
+
+* Maximum number of consecutive zeros in datastream before data gap will be
+* declared (-1 = disabled).
+zero_sample_limit = -1
+
+* Default timing quality in percents. This value will be used when no
+* timing quality information is available. Can be -1 to omit the blockette
+* 1001 altogether.
+default_tq = 0
+
+* Timing quality to use when GPS is out of lock
+unlock_tq = 10
+
+* Keyword 'channel' is used to map input channels to symbolic channel
+* names. Channel names are arbitrary 1..10-letter identifiers which should
+* match the input names of the stream processing scheme in streams.xml,
+* which is referenced from seedlink.ini
+
+channel Z source_id=0
+channel E source_id=1
+channel N source_id=2
+
+* "State of health" channels
+
+channel S0 source_id=16
+channel S1 source_id=17
+channel S2 source_id=18
+channel S3 source_id=19
+channel S4 source_id=20
+channel S5 source_id=21
+channel S6 source_id=22
+channel S7 source_id=23
+channel S8 source_id=24
+* channel S9 source_id=25
+ 

share/templates/seedlink/dr24/seedlink_plugin.tpl

@@ -0,0 +1,7 @@
+* template: $template
+plugin $seedlink.source.id cmd = "$seedlink.plugin_dir/serial_plugin$seedlink._daemon_opt -v -f $seedlink.config_dir/plugins.ini"
+             timeout = 600
+             start_retry = 60
+             shutdown_wait = 10
+             proc = "$sources.dr24.proc"
+

share/templates/seedlink/dr24/setup.py

@@ -0,0 +1,26 @@
+import os
+
+'''
+Plugin handler for the Geotech DR24 plugin.
+'''
+class SeedlinkPluginHandler:
+  # Create defaults
+  def __init__(self): pass
+
+  def push(self, seedlink):
+    # Check and set defaults
+    try: seedlink.param('sources.dr24.comport')
+    except: seedlink.setParam('sources.dr24.comport', '/dev/data')
+
+    try: seedlink.param('sources.dr24.baudrate')
+    except: seedlink.setParam('sources.dr24.baudrate', 19200)
+
+    try: seedlink.param('sources.dr24.proc')
+    except: seedlink.setParam('sources.dr24.proc', 'dr24_50')
+
+    return seedlink.param('sources.dr24.comport')
+
+
+  # Flush does nothing
+  def flush(self, seedlink):
+    pass

share/templates/seedlink/dr24/streams_dr24_50.tpl

@@ -0,0 +1,28 @@
+  <proc name="dr24_50">
+    <tree>
+      <input name="Z" channel="Z" location="" rate="50"/>
+      <input name="N" channel="N" location="" rate="50"/>
+      <input name="E" channel="E" location="" rate="50"/>
+      <node stream="SH"/>
+      <node filter="F96C" stream="BH">
+        <node filter="FS2D5">
+          <node filter="FS2D5" stream="LH">
+            <node filter="VLP" stream="VH"/>
+          </node>
+        </node>
+      </node>
+    </tree>
+    <tree>
+      <input name="S0" channel="0" location="" rate="1/10"/>
+      <input name="S1" channel="1" location="" rate="1/10"/>
+      <input name="S2" channel="2" location="" rate="1/10"/>
+      <input name="S3" channel="3" location="" rate="1/10"/>
+      <input name="S4" channel="4" location="" rate="1/10"/>
+      <input name="S5" channel="5" location="" rate="1/10"/>
+      <input name="S6" channel="6" location="" rate="1/10"/>
+      <input name="S7" channel="7" location="" rate="1/10"/>
+      <input name="S8" channel="8" location="" rate="1/10"/>
+      <input name="S9" channel="9" location="" rate="1/10"/>
+      <node stream="AE"/>
+    </tree>
+  </proc>