[seiscomp, scanloc] Install, add .gitignore

etc/descriptions/global_md.xml

@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<seiscomp>
+        <plugin name="Md">
+                <extends>global</extends>
+                <description>
+                Duration magnitude plugin
+                </description>
+	</plugin>
+	<binding name="Md" module="global">
+		<description>
+		Duration magnitude plugin
+		</description>
+		<configuration>
+			<group name="magnitudes">
+				<group name="md">
+					<parameter name="seismo" type="int" default="9">
+						<description>
+						Default filter type to use before processing and after deconvolution. It's possible to set :
+						1 for a Wood-Anderson seismometer
+						2 for a 5sec generic Seismometer
+						3 for a WWSSN LP seismometer
+						4 for a WSSN SP seismometer
+						5 for a Generic Seismometer
+						6 for a Butterworth Low pass filter
+						7 for a Butterworth High pass filter
+						8 for a Butterworth Band pass filter
+						9 for a 1Hz eigen-frequency L4C seismometer
+						</description>
+					</parameter>
+					<parameter name="taper" type="double" default="5" unit="s">
+						<description>
+						taper applied to the signal
+						</description>
+					</parameter>
+					<parameter name="signal_length"  type="double" default="150" unit="s">
+						<description>
+						signal length used to compute the duration magnitude
+						</description>
+					</parameter>
+					<parameter name="butterworth" type="string" default="&quot;3,1.5&quot;">
+						<description>
+						Butterworth filter parameter applied to the signal
+						</description>
+					</parameter>
+					<parameter name="depthmax" type="double" default="200" unit="km">
+						<description>
+						Maximum depth at which duration magnitude is valid
+						</description>
+					</parameter>
+					<parameter name="deltamax" type="double" default="400" unit="km">
+						<description>
+						Maximum distance between earthquake and station at which duration magnitude is valid
+						</description>
+					</parameter>
+					<parameter name="snrmin" type="double" default="1.2">
+						<description>
+						Signal to noise ratio below which the coda is reached
+						</description>
+					</parameter>
+					<parameter name="mdmax" type="double" default="5.0">
+						<description>
+						Maximum expected duration magnitude value
+						This is used to find how much data should be loaded for a given station by reversing the formula
+						</description>
+					</parameter>
+					<parameter name="fma" type="double" default="-0.87">
+						<description>
+						FMA regional coefficient
+						See Hypo2000 manual
+						</description>
+					</parameter>
+					<parameter name="fmb" type="double" default="2.0">
+						<description>
+						FMB regional coefficient
+						See Hypo2000 manual
+						</description>
+					</parameter>
+					<parameter name="fmd" type="double" default="0.0035">
+						<description>
+						FMD regional coefficient
+						See Hypo2000 manual
+						</description>
+					</parameter>
+					<parameter name="fmf" type="double" default="0.0">
+						<description>
+						FMF regional coefficient
+						See Hypo2000 manual
+						</description>
+					</parameter>
+					<parameter name="fmz" type="double" default="0.0">
+						<description>
+						FMZ regional coefficient
+						See Hypo2000 manual
+						</description>
+					</parameter>
+					<parameter name="linearcorrection" type="double" default="1.0">
+						<description>
+						Linear correction
+						</description>
+					</parameter>
+					<parameter name="offset" type="double" default="0.0">
+						<description>
+						Offset
+						</description>
+					</parameter>
+					<parameter name="stacor" type="double" default="0.0">
+						<description>
+						Station correction
+						</description>
+					</parameter>
+				</group>
+			</group>
+		</configuration>
+	</binding>
+</seiscomp>