[seiscomp, scanloc] Install, add .gitignore

etc/defaults/slarchive.cfg

@@ -0,0 +1,72 @@
+# Host of the Seedlink server to connect to. If the acquisition
+# is running on one system nothing needs to be changed.
+address = 127.0.0.1
+
+# The port of the Seedlink server to connect to. If the acquisition
+# is running on one system this port must match the configured
+# local Seedlink port.
+port = 18000
+
+# Path to waveform archive where all data is stored. Relative paths
+# (as the default) are treated relative to the installation
+# directory ($SEISCOMP_ROOT).
+archive = var/lib/archive
+
+# Number of records (512 byte units) to buffer before flushing to
+# disk.
+buffer = 1000
+
+# The network reconnect delay (in seconds) for the connection
+# to the SeedLink server. If the connection breaks for any
+# reason this will govern how soon a reconnection should be
+# attempted. The default value is 30 seconds.
+delay = 30
+
+# The network timeout (in seconds) for the connection to the
+# SeedLink server. If no data [or keep alive packets?] are received
+# in this time range the connection is closed and re-established
+# (after the reconnect delay has expired). The default value is
+# 600 seconds. A value of 0 disables the timeout.
+networkTimeout = 900
+
+# Timeout for closing idle data stream files in seconds. The idle
+# time of the data streams is only checked when some packets has
+# arrived. If no packets arrived no idle stream files will be
+# closed. There is no reason to change this parameter except for
+# the unusual cases where the process is running against an open
+# file number limit. Default is 300 seconds.
+idleTimeout = 300
+
+# Interval (in seconds) at which keepalive (heartbeat) packets
+# are sent to the server. Keepalive packets are only sent if
+# nothing is received within the interval. This requires a
+# Seedlink version >= 3.
+keepalive = 0
+
+# Path to cerificate store where all certificates and CRLs are stored. Relative
+# paths(as the default) are treated relative to the installation directory
+# ($SEISCOMP_ROOT). If the signature check is enabled slarchive loads all files
+# at start. The store uses the OpenSSl store format. From the offical OpenSSL
+# documentation: "The directory should contain one certificate or CRL per file
+# in PEM format, with a file name of the form hash.N for a certificate, or
+# hash.rN for a CRL. The .N or .rN suffix is a sequence number that starts at
+# zero, and is incremented consecutively for each certificate or CRL with the
+# same hash value. Gaps in the sequence numbers are not supported, it is
+# assumed that there are no more objects with the same hash beyond the first
+# missing number in the sequence.The .N or .rN suffix is a sequence number that
+# starts at zero, and is incremented consecutively for each certificate or CRL
+# with the same hash value. Gaps in the sequence numbers are not supported, it
+# is assumed that there are no more objects with the same hash beyond the first
+# missing number in the sequence." The hash value can be obtained as follows:
+# openssl x509 -hash -noout -in >file<
+validation.certs = var/lib/certs
+
+# Signatures are expected to be carried in blockette 2000 as opaque data.
+# Modes:
+# ignore : Signatures will be ignored and no further actions will be taken.
+# warning: Signatures will be checked and all received records which do not
+# carry a valid signature or no signature at all will be logged with at warning
+# level. skip : All received records without a valid signature will be ignored
+# and will not be processed.
+validation.mode = ignore
+