[seiscomp, scanloc] Install, add .gitignore

etc/defaults/scqcv.cfg

@@ -0,0 +1,445 @@
+# Defines the primary group of a module. This is the name of the group where a
+# module sends its messages to if the target group is not explicitely given in
+# the send call.
+connection.primaryGroup = QC
+
+# Defines a list of message groups to subscribe to. The default is usually
+# given by the application and does not need to be changed.
+connection.subscriptions = QC, CONFIG
+
+# List of QC paramters to be displayed in the details table. Read the scqc
+# documentation for a list of available QC parameters and the default
+# configuration of scqcv $SEISCOMP_ROOT/etc/defaults/scqcv.cfg for more
+# examples.
+# Format: "Parameter name : ConfigName"
+# Example: "delay : delay","spikes count : spike","spikes amplitude :
+# spikeAmplitude" Refer to the parameters by their ConfigName to configure the
+# attriutes.
+parameter = "latency           : latency",\
+            "delay             : delay",\
+            "timing quality    : timing",\
+            "offset            : offset",\
+            "rms               : rms",\
+            "gaps count        : gap",\
+            "overlaps count    : overlap",\
+            "availability      : availability",\
+            "spikes count       : spike"
+#            "gaps interval     : gapInterval",\
+#            "gaps length       : gapLength",\
+#            "spikes interval   : spikeInterval",\
+#            "spikes amplitude  : spikeAmplitude"
+#            "overlaps interval : overlapInterval",\
+#            "overlaps length   : overlapLength"
+
+# List of channels to display. By default the global binding configuration is
+# used which can be overwritten with this parameter.
+streams.codes = default
+
+# Add new streams automatically to the streams configured in streams.codes when
+# waveform QC parameters are provided for these streams.
+streams.cumulative = false
+
+# Length of data to be displayed.
+streamWidget.length = 600
+
+# Names of range profile to be considered. The range profiles define the
+# background color table fields depending on the field value. Add the default
+# ranges for which different intervals and the color are configured.
+default.ranges = sane, bad
+
+# Values are: int, float, percent, timeSpan
+# Displays raw values if unset.
+default.format = float
+
+# Default time in seconds, how long a value is displayed in scqcv if no update
+# is received. Setting to 0 means, show value until updated.
+default.expire = 0
+
+# A color defined by the color definitions below.
+default.color = grey1
+
+# Activate to display absolute values (modulus).
+default.useAbsoluteValue = false
+
+# Values are: int, float, percent, timeSpan
+# Displays raw values if unset.
+availability.format = percent
+
+# Default time in seconds, how long a value is displayed in scqcv if no update
+# is received. Setting to 0 means, show value until updated.
+availability.expire = 600
+
+# Value interval for range sane
+availability.range.sane = 99.0, 101.0
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+availability.range.sane.count = 0
+
+# Names of range profile to be considered The range profiles s define the
+# background color table fields depending on the field value. Add the default
+# ranges for which different intervals and the color are configured.
+delay.ranges = sane, inter, bad
+
+# Values are: int, float, percent, timeSpan
+# Displays raw values if unset.
+delay.format = timeSpan
+
+# Value interval for range sane
+delay.range.sane = 0.0, 60.0
+
+# Value interval for range inter
+delay.range.inter = 60, 120
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+delay.range.bad.count = -500
+
+# A color defined by the color definitions below.
+delay.range.bad.color = red
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+delay.range.inter.count = -1
+
+# A color defined by the color definitions below.
+delay.range.inter.color = yellow
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+delay.range.sane.count = 0
+
+# A color defined by the color definitions below.
+delay.range.sane.color = green
+
+# Default time in seconds, how long a value is displayed in scqcv if no update
+# is received. Setting to 0 means, show value until updated.
+gap.expire = 600
+
+# Value interval for range sane
+gap.range.sane = 0.0, 0.0
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+gap.range.sane.count = 0
+
+# Values are: int, float, percent, timeSpan
+# Displays raw values if unset.
+latency.format = timeSpan
+
+# Value interval for range sane
+latency.range.sane = 0.0, 600.0
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+latency.range.bad.count = -1000
+
+# A color defined by the color definitions below.
+latency.range.bad.color = grey
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+latency.range.sane.count = 0
+
+# Activate to display absolute values (modulus).
+offset.useAbsoluteValue = true
+
+# Value interval for range sane
+offset.range.sane = 0.0, 500.E3
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+offset.range.sane.count = 0
+
+# Value interval for range sane
+rms.range.sane = 10.0, 20.E3
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+rms.range.sane.count = 0
+
+# A color defined by the color definitions below.
+rms.range.sane.color = green
+
+# Default time in seconds, how long a value is displayed in scqcv if no update
+# is received. Setting to 0 means, show value until updated.
+spike.expire = 600
+
+# Value interval for range sane
+spike.range.sane = 0.0, 0.0
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+spike.range.sane.count = 0
+
+# Names of range profile to be considered The range profiles s define the
+# background color table fields depending on the field value. Add the default
+# ranges for which different intervals and the color are configured.
+timing.ranges = sane, inter, bad
+
+# Values are: int, float, percent, timeSpan
+# Displays raw values if unset.
+timing.format = int
+
+# Activate to display absolute values (modulus).
+timing.useAbsoluteValue = false
+
+# Value interval for range sane
+timing.range.sane = 90.0, 100.0
+
+# Value interval for range inter
+timing.range.inter = 50.0, 90.0
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+timing.range.bad.count = -100
+
+# A color defined by the color definitions below.
+timing.range.bad.color = darkred
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+timing.range.inter.count = -1
+
+# A color defined by the color definitions below.
+timing.range.inter.color = yellow
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+timing.range.sane.count = 0
+
+# A color defined by the color definitions below.
+timing.range.sane.color = green
+
+#
+range.bad = -99.9E99, 99.0E99
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+range.bad.count = -1
+
+# A color defined by the color definitions below.
+range.bad.color = red
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+range.inter.count = 0
+
+# A color defined by the color definitions below.
+range.inter.color = yellow
+
+# Value interval for range sane
+range.sane = 0.0, 99.0E99
+# Contribution of this range for computing the score. The range must be
+# considered.
+range.sane.count = 0
+
+# A color defined by the color definitions below.
+range.sane.color = green
+
+###############################################################################
+# score values for overview window
+# Ranges to be considered for forming the score. Set the count parameter from the
+# respective range section for controlling the contribution of this range.
+score.default.ranges = latency,\
+                       delay,\
+                       timing,\
+                       below,\
+                       r10,\
+                       r09,\
+                       r08,\
+                       r07,\
+                       r06,\
+                       r05,\
+                       r04,\
+                       r03,\
+                       r02,\
+                       r01,\
+                       above,\
+                       unset
+
+#
+range.above = 0, 999
+
+# A color defined by the color definitions below.
+range.above.color = green
+
+# Possible values: enableStream, disableStream
+range.above.action = enableStream
+
+#
+range.below = -99, -11
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+range.below.count = 0
+
+# A color defined by the color definitions below.
+range.below.color = grey
+
+# Possible values: enableStream, disableStream
+range.below.action = disableStream
+
+#
+range.timing = -200, -100
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+range.timing.count = 0
+
+# A color defined by the color definitions below.
+range.timing.color = darkred
+
+#
+range.delay = -600, -500
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+range.delay.count = 0
+
+# A color defined by the color definitions below.
+range.delay.color = darkred
+
+# define cumulative status ranges
+range.latency = -1900, -1000
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+range.latency.count = 0
+
+# A color defined by the color definitions below.
+range.latency.color = grey
+
+#
+range.r01 = -1, -1
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+range.r01.count = 0
+
+# A color defined by the color definitions below.
+range.r01.color = red01
+
+#
+range.r02 = -2, -2
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+range.r02.count = 0
+
+# A color defined by the color definitions below.
+range.r02.color = red02
+
+#
+range.r03 = -3, -3
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+range.r03.count = 0
+
+# A color defined by the color definitions below.
+range.r03.color = red03
+
+#
+range.r04 = -4, -4
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+range.r04.count = 0
+
+# A color defined by the color definitions below.
+range.r04.color = red04
+
+#
+range.r05 = -5, -5
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+range.r05.count = 0
+
+# A color defined by the color definitions below.
+range.r05.color = red05
+
+#
+range.r06 = -6, -6
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+range.r06.count = 0
+
+# A color defined by the color definitions below.
+range.r06.color = red06
+
+#
+range.r07 = -7, -7
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+range.r07.count = 0
+
+# A color defined by the color definitions below.
+range.r07.color = red07
+
+#
+range.r08 = -8, -8
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+range.r08.count = 0
+
+# A color defined by the color definitions below.
+range.r08.color = red08
+
+#
+range.r09 = -9, -9
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+range.r09.count = 0
+
+# A color defined by the color definitions below.
+range.r09.color = red09
+
+#
+range.r10 = -10, -10
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+range.r10.count = 0
+
+# A color defined by the color definitions below.
+range.r10.color = red10
+
+#
+range.unset = 1000, 1000
+
+# Contribution of this range for computing the score. The range must be
+# considered.
+range.unset.count = 0
+
+# A color defined by the color definitions below.
+range.unset.color = grey1
+
+
+# R, G, B, alpha colors
+color.red = 	255, 000, 000, 64
+color.yellow = 	255, 255, 000, 64
+color.green = 	000, 255, 000, 100
+color.blue = 	000, 000, 255, 100
+color.grey = 	130, 130, 130, 255
+color.grey1 = 	240, 240, 240, 255
+color.darkred = 255, 000, 000, 196
+#
+color.red10 = 	255, 000, 000, 255
+color.red09 = 	255, 000, 000, 240
+color.red08 = 	255, 000, 000, 220
+color.red07 = 	255, 000, 000, 200
+color.red06 = 	255, 000, 000, 175
+color.red05 = 	255, 000, 000, 150
+color.red04 = 	255, 000, 000, 125
+color.red03 = 	255, 000, 000, 100
+color.red02 = 	255, 000, 000, 85
+color.red01 = 	255, 000, 000, 70
+
+# valid formats are:
+format.float = 2