[seiscomp, scanloc] Install, add .gitignore

etc/defaults/scmag.cfg

@@ -0,0 +1,57 @@
+# Send to the MAGNITUDE group
+connection.primaryGroup = MAGNITUDE
+
+# Receive objects from PICK, AMPLITUDE and LOCATION group
+connection.subscriptions = PICK, AMPLITUDE, LOCATION
+
+# Interval between 2 sending processes. The interval has influence how often
+# information is updated.
+sendInterval = 1
+
+# The minimum weight of an arrival to be used for magnitude
+# calculations.
+minimumArrivalWeight = 0.5
+
+# Defines the types of magnitudes to calculate.
+# A magnitude of a given type is going to be calculated
+# only when a corresponding amplitude exists. Check
+# the amplitudes calculated by scautopick and scamp also.
+magnitudes = MLv, mb, mB, Mwp
+
+# Defines the average method to use when computing
+# the network magnitude. To define the average method
+# per magnitude type append the type, eg:
+# magnitudes.average = default, MLv:median
+# The default behaviour is to compute the mean if less
+# than 4 contributed station magnitudes exist otherwise
+# a trimmed mean of 25 percent is used.
+magnitudes.average = default
+
+# Enable/disable calculation of a summary magnitude
+summaryMagnitude.enabled = true
+
+# This is the minimum station magnitude required for any
+# magnitude to contribute to the summary magnitude at all. If
+# this is set to 4 then no magnitude with less than 4 station
+# magnitudes is taken into consideration even if this results
+# in no summary magnitude at all. For this reason, the
+# default here is 1 but in a purely automatic system it should
+# be higher, at least 4 is recommended.
+summaryMagnitude.minStationCount = 1
+
+# Define the type of the summary magnitude
+summaryMagnitude.type = M
+
+# Define the coefficients to calculate the weight
+# of a magnitude:
+#   weight = a*magStationCount+b
+# Unnamed values define the default values
+summaryMagnitude.coefficients.a = 0, Mw(mB):0.4, Mw(Mwp):0.4
+summaryMagnitude.coefficients.b = 1, MLv:2, Mw(mB):-1, Mw(Mwp):-1
+
+# Define the magnitudes to include into the the summary magnitude
+# calculation
+#summaryMagnitude.whitelist = ""
+summaryMagnitude.blacklist = mB, Mwp
+
+summaryMagnitude.singleton = true