[seiscomp, scanloc] Install, add .gitignore

etc/defaults/scevent.cfg

@@ -0,0 +1,203 @@
+# Send to the EVENT group
+connection.primaryGroup = EVENT
+
+# Receive objects from LOCATION, MAGNITUDE and FOCMECH group
+connection.subscriptions = LOCATION, MAGNITUDE, FOCMECH, EVENT
+
+
+# A magnitudes needs at least 4 stationmagnitudes
+# to become preferred
+eventAssociation.minimumMagnitudes = 4
+
+# An automatic origin will be associated to an
+# event when it has at least 10 phases
+eventAssociation.minimumDefiningPhases = 10
+
+# Minimum score of an automatic origin to be allowed to
+# form an new Event. This requires an activated score
+# plugin. See parameter score.
+# If set the minimumDefiningPhases has no effect at as
+# this check will be superseded by the score check. It is
+# the task of the score processor to evaluate a proper
+# score for all input origins.
+# By default this option is deactivated.
+#eventAssociation.minimumScore = 1
+
+# An automatic origin will be associated to an
+# event when it falls inside this region.
+# Format: min-lat, min-lon, max-lat, max-lon
+#eventAssociation.region.rect = -90,-180,90,180
+
+# Search 1800 seconds BEFORE origin time of a
+# new location for matching events
+eventAssociation.eventTimeBefore = 1800
+
+# Search 1800 seconds AFTER origin time of a
+# new location for matching events
+eventAssociation.eventTimeAfter = 1800
+
+# An origin will be associated to an existing
+# event when at least 3 picks matches with
+# former associated origins
+eventAssociation.minimumMatchingArrivals = 3
+
+# If this time window in seconds is negative, pickIDs
+# are compared to find matching arrivals. A non negative
+# value (including 0) compares pick times regardless
+# of the pickID.
+# Pass: |pick1.time - pick2.time| <= threshold
+eventAssociation.maximumMatchingArrivalTimeDiff = -1
+
+# This parameter is only used in conjunction with
+# eventAssociation.maximumMatchingArrivalTimeDiff. If a station
+# has multiple associated arrivals for a particular event, this
+# flag defines if the time distance of a new pick to all arrivals
+# must be within eventAssociation.maximumMatchingArrivalTimeDiff
+# or if one matching arrival is enough.
+eventAssociation.compareAllArrivalTimes = true
+
+# Associates an origin with an existing event
+# if the origin time differs not more
+# than 60 seconds unless the minimumMatchingArrivals
+# criteria matches.
+eventAssociation.maximumTimeSpan = 60
+
+# Associates an origin to an existing event
+# when the location differs not more
+# than 5 degrees unless the minimumMatchingArrivals
+# criteria matches
+eventAssociation.maximumDistance = 5
+
+# Minimum number of station magnitudes required for Mw(mB) to be considered as
+# preferred magnitude.
+eventAssociation.minMwCount = 8
+
+# If false then the station count rules out the magnitude priority
+# which is only taken into account if two magnitudes have the
+# same station count.
+#
+# If true then the priority rules out the station count
+# which is only taken into account if two magnitudes have the
+# same priority.
+eventAssociation.magPriorityOverStationCount = false
+
+# Minimum number of station magnitudes which ensures that Mw(mB) will be
+# preferred and not mb.
+eventAssociation.mbOverMwCount = 30
+
+# Average between mb and Mw(mB) which must be exceeded to become Mw(mB)
+# preferred.
+eventAssociation.mbOverMwValue = 6
+
+# The magnitude type priority list
+# Magnitudes with other types cannot become
+# preferred magnitudes
+eventAssociation.magTypes = M
+
+# The agencyID priority list
+# When the eventtool comes to the point to select a preferred
+# origin it orders all origins by its
+# agency priority and selects then the best one among the
+# highest priority agency.
+# It also defines the agency priority for custom priority
+# checks (eventAssociation.priorities)
+#eventAssociation.agencies = GFZ
+
+# The author priority list
+# When the eventtool comes to the point to select a preferred
+# origin it orders all origins by its
+# author priority and selects then the best one among the
+# highest priority author.
+# It also defines the author priority for custom priority
+# checks (eventAssociation.priorities)
+#eventAssociation.authors = scautoloc@localhost
+
+# The general priority list to decide if an origin becomes preferred. The
+# priority decreases in the order of the parameters. This list is not used
+# unless this parameter is activated.
+# Empty priority list: scevent replicates the default hard wired behaviour:
+# AGENCY, STATUS, PHASES_AUTOMATIC, TIME_AUTOMATIC
+# Each item in the list corresponds to a check that is performed. Each check
+# computes a score of the incoming origin (s1) and the current preferred origin
+# (s2). If the s1 is lower than s2, the incoming origin is rejected and does
+# not become preferred. All subsequent checks are ignored. If s1 is equal to
+# s2, the next check in the list is performed. If s1 is larger than s2, the
+# origin becomes preferred and all subsequent checks are ignored.
+# Available tokens:
+# AGENCY: check based on agency priorities
+# AUTHOR: check based on author priorities
+# MODE: evaluation mode priority: 0 = unset, 1 = automatic, 2 = manual, manual
+# over-rules automatic
+# STATUS: priority combined from evaluation status and evaluation mode: -100 =
+# status is rejected, -1 = status is reported, 0 = status is preliminary or
+# status is unset and mode is automatic, 1 = status is confirmed or status is
+# unset and mode is manual, 2 = status is reviewed, 3 = status is final,
+# METHOD: check based on the method priorities
+# PHASES: higher phase count = higher priority
+# PHASES_AUTOMATIC: only checks phase priorities for incoming automatic origins
+# RMS: lower rms = higher priority
+# RMS_AUTOMATIC: only check RMS on incoming automatic origins
+# TIME: more recent origins (creationTime) have higher priorities
+# TIME_AUTOMATIC: only check creationTime priority on incoming automatic
+# origins
+# SCORE: evaluates the score according to a configured ScoreProcessor and
+# prefers the origin/focalmechanism with the highest score
+#eventAssociation.priorities = AGENCY, STATUS, PHASES_AUTOMATIC, TIME_AUTOMATIC
+
+# If true, one magnitude will be preferred even if magnitude criteria are
+# not fullfilled.
+eventAssociation.enableFallbackMagnitude = false
+
+# The eventID prefix
+# The eventID format is [prefix][year][code], e.g. gfz2008fdvg
+eventIDPrefix = "gfz"
+
+# Defines the pattern to generate an event ID.
+# %p : prefix
+# %Y : year
+# %[w]c: alpha character
+# %[w]C: upper case alpha character
+# %[w]d: decimal
+# %[w]x: hexadecimal
+# %[w]X: upper case hexadecimal
+eventIDPattern = "%p%Y%04c"
+
+# Configures the number of event ID slots to look back and forth when an event
+# ID is already taken. The default in previous versions was 5. Now -1 means
+# that the margin is determined automatically based on
+# "eventAssociation.eventTimeBefore" and "eventAssociation.eventTimeAfter".
+# According to the configured "eventIDPattern" a fixed time range per slot can
+# be computed and with that width the number of look ahead slots and look back
+# slots can be computed based on the given time ranges for event association.
+eventIDLookupMargin = -1
+
+# Configures a timespan in seconds to delay origin association
+#eventAssociation.delayTimeSpan = 0
+
+# AgencyID filter used to delay origin association if
+# eventAssociation.delayTimeSpan > 0
+#eventAssociation.delayFilter.agencyID = agency
+
+# Author filter used to delay origin association if
+# eventAssociation.delayTimeSpan > 0
+#eventAssociation.delayFilter.author = author
+
+# evaluationMode filter used to delay origin association if
+# eventAssociation.delayTimeSpan > 0. Allowed values are "manual" or "automatic"
+#eventAssociation.delayFilter.evaluationMode = automatic
+
+# Defines whether to associate or to ignore origins derived from CMT/MT
+# inversions.
+eventAssociation.ignoreFMDerivedOrigins = true
+
+# If the preferred origin has evaluation status 'rejected' the event type will
+# be set as 'not existing' unless the event type has been fixed by an operator
+# or the preferred origin has been fixed.
+eventAssociation.declareFakeEventForRejectedOrigin = false
+
+# Allows to match picks that are associated with weight 0
+eventAssociation.allowLooseAssociatedArrivals = false
+
+# If enabled then the EventDescription with type 'Flinn-Engdahl region'
+# will be populated with the Flinn-Engdahl region name.
+populateFERegion = false