[seiscomp, scanloc] Install, add .gitignore

etc/defaults/scautoloc.cfg

@@ -0,0 +1,84 @@
+## Send to the LOCATION group
+connection.primaryGroup = LOCATION
+
+## Receive objects from PICK and AMPLITUDE groups
+connection.subscriptions = PICK, AMPLITUDE
+
+## max. permissible RMS for a location to be reported
+#autoloc.maxRMS = 3.5
+
+## max. individual residual (unweighted) for a pick to
+## be used in location
+#autoloc.maxResidual = 7.0
+
+## Max. secondary azimuth gap for an origin to be reported by.
+## Default is 360 degrees, i.e. no restriction based on this parameter.
+#autoloc.maxSGAP = 360
+
+## Arrivals with exceptionally large amplitudes may be
+## flagged as XXL, allowing (in future) faster, preliminary
+## "heads-up" alerts.
+#autoloc.thresholdXXL = 10000.
+
+#autoloc.maxStationDistance = 180
+#autoloc.maxDistanceXXL = 10
+#autoloc.minPhaseCount = 6
+#autoloc.minPhaseCountXXL = 4
+
+## If the station count for stations at < 105 degrees
+## distance exceeds this number, no picks at > 105 degrees will be
+## used in location. They will be loosely associated, though.
+#autoloc.minStaCountIgnorePKP = 15
+
+## Clean-up interval for removing old/unused objects, in seconds
+## Don't change.
+#autoloc.cleanupInterval = 3600
+
+## max. age for objects kept in memory, in seconds
+## Default is 6 hours - don't change.
+#autoloc.maxAge = 21600
+
+## Don't change.
+#autoloc.wakeupInterval = 5
+
+## Grid configuration
+#autoloc.grid = @DATADIR@/scautoloc/grid.conf
+
+## Station configuration
+#autoloc.stationConfig = @DATADIR@/scautoloc/station.conf
+
+## This is only relevant in offline/testing mode
+#locator.stationLocations = @DATADIR@/scautoloc/station-locations.conf
+
+## Manual picks/origins can be fed back into autoloc for two purposes:
+##   * passive association to a solution from a "trusted" source so that we
+##     avoid fake or wrong locations due to events outside our area of interest
+##   * use the manual origins in further processing, especially the manual picks.
+##     Possibly also honor an operator specified fixed depth.
+## Currently we only permit use of manual picks which are then used
+## instead of the corresponding automatic picks (if existing)
+# autoloc.useManualPicks = false
+
+
+## Log all picks received by scautoloc to this file
+autoloc.pickLog = @LOGDIR@/autoloc-picklog
+
+# Amplitude type to be used as SNR amplitude
+# Don't change unless you know exactly what you are doing.
+autoloc.amplTypeSNR = snr
+
+# Amplitude type to be used as absolute amplitude
+# Don't change unless you know exactly what you are doing.
+autoloc.amplTypeAbs = mb
+
+# Use manual origins from our own agency. Essentially it means to
+# use manual picks from manual origins, which is assumed to be
+# better than using only automatic picks.
+autoloc.useManualOrigins = false
+# NOTE: If you set the above to true, then make sure to add the
+# LOCATION group to connection.subscriptions!
+
+# If autoloc.useManualOrigins is true, adopt the depth from manual
+# origins, which is especially important if it was fixed by the analyst.
+autoloc.adoptManualDepth = false
+