[seiscomp, scanloc] Install, add .gitignore

etc/defaults/scanloc.cfg

@@ -0,0 +1,283 @@
+plugins=${plugins}, scoresum
+
+# Sets the logging level between 1 and 4 where 1=ERROR, 2=WARNING, 3=INFO and
+# 4=DEBUG.
+logging.level = 2
+
+# Defines the primary group of a module. This is the name of the group where a
+# module sends its messages to if the target group is not explicitely given in
+# the send call.
+connection.primaryGroup = LOCATION
+
+# Defines a list of message groups to subscribe to. The default is usually
+# given by the application and does not need to be changed.
+connection.subscriptions = PICK, LOCATION
+
+# Default source depth used for locating origins. The range of supported values
+# depends on the configured travel-time interface and locator.
+# When origin depth after locating is 0.0 or undefined, the depth is corrected
+# to "defaultDepth" without relocating since the situation indicates issues.
+# Note: A similar parameter may require configuration for score plugins.
+defaultDepth = 0.0
+
+# Maximum depth of an origin to be sent.
+# Note: A similar parameter may require configuration for score plugins.
+ignoreDepth = 650.0
+
+# Compute distances in 3D for cluster search, phase association and internal
+# event association. Otherwise, distances are measured from geographic
+# coordinates ignoring elevation.
+use3D = false
+
+# Maximum allowed overall residual of an origin to be sent.
+maxRMS = 1.5
+
+# Minimum score of an origin to be sent.
+minScore = 0.0
+
+# Defines the score processor to be used for ranking origins of events.
+# Additional configuration of the plugin and the plugin parameters is required.
+score = OriginSum
+
+# Time to keep picks. Time comparison is based on the pick times. In non-real
+# time playbacks the time to keep picks is usually compressed.
+buffer.pickKeep = 180.0
+
+# Time to keep origins. Time comparison is based on the origin times. In
+# non-real time playbacks the time to keep orgins is usually compressed.
+buffer.originKeep = 180.0
+
+# Ignore and do not buffer external origins received from messaging or from XML
+# files.
+# Default: Accept external origins from messaging or XML and associate more
+# phases.
+buffer.ignoreOrigins = false
+
+# Ignore and do not buffer manual external origins received from messaging or
+# from XML files.
+# The parameter "buffer.ignoreOrigins" must be inactive for this option to be
+# effective.
+buffer.ignoreManualOrigins = true
+
+# The time delta to the future. Positive values allow objects with times in the
+# future to be buffered when the difference to current time or to creation time
+# is not larger than the given value.
+# Normally, objects like picks and origins are created after their actual times
+# and all other objects are spurious and should be ignored. In case of wrong
+# sensor timing or faster-than-real-time waveform playbacks, objects may be
+# generated with actual times (pick time or origin time) in the future.
+# If less or equal to 0.0, then all objects created before time of the object
+# or with object times in the future are ignored.
+buffer.futureTimeDelta = 0.0
+
+# Phase type of considered picks. Valid types: P or Is.
+clusterSearch.phaseType = P
+
+# Minimum number of core points (picks) to form a cluster.
+clusterSearch.minSize = 4
+
+# Maximum number of picks in a cluster when stopping clustering. Eventual
+# clusters may still be larger from core points. Using values < 0 deactivates
+# the feature.
+# The parameter is meant to support large-N networks where the high network
+# density results in very many clusters with high computational load
+# effectively slowing down the processing of picks. Using reasonable values
+# such as 10 or 15 will reduce the number of clusters while maintaining high
+# quality initial origins.
+clusterSearch.maxSize = -1
+
+# Maximum allowed difference between considered picks and cluster reference
+# time (latest pick time). Optimum values can be derived from travel times.The
+# cluster search ignores all picks which exceed the value. Using "-1" enables
+# all picks regardless of the delay.
+clusterSearch.maxPickDelay = -1.0
+
+# Mode to set the cluster reference time. Read the documentation for the
+# details. Available modes:
+# LastPick: The pick time of the last incoming P pick is the cluster reference
+# time.
+# MaxPickDelay: Setting the cluster reference time is delayed until
+# clusterSearch.minSize and association.minPhase picks are available.
+clusterSearch.referenceTimeMode = LastPick
+
+# The level on which to compare stream IDs of picks in order to avoid origins
+# with multiple picks from the same sensor. The level is derived from the
+# NET.STA.LOC.CHA stream representation. Picks with equal stream IDs on the
+# given level are treated as originating from the same stream no matter of the
+# ID on a higher level. Clusters having picks on streams equal on the given
+# level are split into new clusters with unique streams. During association
+# picks equal on the given level are ignored - the first assigned pick wins.
+streamCheckLevel = loc
+
+# Average velocity used for distance calculation.
+clusterSearch.averageVelocity = 7.0
+
+# Maximum allowed distance over all core points and maximum allowed distance
+# for neighborhood search. Both account for travel-time difference,
+# inter-station distance and the configured averageVelocity.
+clusterSearch.maxSearchDist = 60
+
+# Maximum allowed origins derived from cluster search. Set this option to zero
+# to disable the cluster search completly.
+clusterSearch.maxOrigins = 128
+
+# Send origins based on cluster search as preliminary origins if the location
+# fails. Otherwise those origins are ignored. Consider activating
+# "checkOrigins".
+clusterSearch.preliminary = false
+
+# Check, if derived origins fulfill the cluster search criteria anymore.
+# Activating this option may lower the number of events and suppress fake
+# events.
+clusterSearch.checkOrigins = false
+
+# Number picks in cluster origin to be reached for starting to associate more P
+# and S picks.
+association.minPhase = 4
+
+# Maximum distance from origin to stations for associating P and S picks.
+association.maxDist = 1000.0
+
+# Maximum allowed difference between measured and predicted arrival times for
+# associating P phases to origin. Larger values allow significant correction of
+# initial locations.
+association.maxPResidual = 4.0
+
+# Allow S-type picks without checking for a reference pick. References to P
+# picks are typically added to S picks by scautopick but picks from other
+# modules may not have this feature. When this option is active, the reference
+# pick is not tested at all.
+association.dropReferenceCheck = false
+
+# Maximum allowed difference between measured and predicted arrival time for
+# associating S phases to origins. Larger values allow significant correction
+# of initial locations.
+association.maxSResidual = 4.0
+
+# Maximum allowed time residuals of picks after association and relocation.
+# Picks will be removed at exceedence starting with largest residual and
+# origins will be relocated.
+association.maxResidual = 2.0
+
+# The number of arrivals of an origin for controlling the association of more
+# picks. Beyond this number, the minimum of maxPResidual or maxSResidual and
+# maxResidual for associating P or S phases, respectively, is tested before
+# association. Using values < 0 deactivates the feature.
+# The parameter is meant to support large-N networks where the high network
+# density results in very many picks and high computational load, effectively
+# slowing down the quality check of picks. Setting a reasonable value, e.g.,
+# >20 will only associate the best picks to origins already well constraint.
+association.arrivalCountMinRes = -1
+
+# Type of travel-time tables for phase association. May be different from
+# locator.
+association.tableType = LOCSAT
+
+# Name of travel-time table used for phase association. May be different from
+# locator profile. Using a different table/profile may result in increased
+# runtime.
+association.table = iasp91
+
+# The locator type to be used. Use e.g. LOCSAT or Hypo71.
+locator.type = LOCSAT
+
+# The locator profile to be used. Using a different profile/table for locating
+# and associating may result in increased runtime.
+locator.profile = iasp91
+
+# If enabled, the locator fixes the depth to the configured default value
+# "defaultDepth" in case that all previous attempts to relocate fail. This
+# option may result in many more origins. It prevents "ignoreDepth" from beeing
+# effective if "defaultDepth" < "ignoreDepth".
+locator.fixDepth = false
+
+# If enabled, the locator is forced to fix the depth to the value configured by
+# "defaultDepth". Free-depth solutions are excluded. Activating this
+# option may be useful for sources with known depths or in case of sparse
+# networks.
+locator.forceFixDepth = false
+
+# This parameter is only used in conjunction with
+# "eventAssociation.maximumMatchingArrivalTimeDiff". If a station has multiple
+# associated arrivals for a particular event, this flag defines if the time
+# distance of a new pick to all arrivals must be within
+# "eventAssociation.maximumMatchingArrivalTimeDiff" or if one matching arrival
+# is enough.
+eventAssociation.compareAllArrivalTimes = false
+
+# Minimum number of matching picks between two origins to be associated to the
+# same event.
+eventAssociation.minMatchingArrivals = 3
+
+# If this time window in seconds is negative, pickIDs are compared to find
+# matching arrivals. A non negative value (including 0) compares pick times
+# regardless of the pickID. Pass: |pick1.time - pick2.time| <= threshold.
+eventAssociation.maxMatchingArrivalTimeDiff = -1
+
+# Allowed difference in epicenter between an incoming origin compared with
+# preferred origins to get associated.
+eventAssociation.maxDist = 500.0
+
+# Associates an origin with an existing event if the origin time differs not
+# more than 60 seconds unless the minimumMatchingArrivals criteria matches.
+eventAssociation.maxTimeSpan = 60.0
+
+# Parameter "a" in the equation t = a x N + b.
+# Increasing the value reduces the amount of sent origins. With the option --ep
+# (playback mode) this value is set to 0.
+publication.intervalTimeSlope = 0.5
+
+# Parameter "b" in the equation t = a x N + b.
+# Increasing the value reduces the amount of sent origins. With the option --ep
+# (playback mode) this value is set to 0.
+publication.intervalTimeIntercept = 0.0
+
+# Integer interval to check the origin buffer for sending origins if no other
+# origins have been created.
+# Reducing the value may be required in EEW: it increases the load on scanloc
+# but allows to send origins more rapidly.
+publication.wakeUpInterval = 5
+
+# The weight for number of used P arrival measures. Assumes only arrival time
+# when exactly 1 value is set. Use a comma-separated list, wT,wSlo,wBaz, for
+# giving specific weight to pick time, slowness and back azimuth, respectively.
+# Example: 1.0,0.0,0.0 .
+# The usage of slowness and back azimuth depends on locator. They are not
+# considered by Hypo71, NonLinLoc, StdLoc and FixedHypocenter.
+# Also used for Is infrasound phases when considered in clustering.
+score.sum.p = 1.0
+
+# The weight for number of added but unused P arrivals.
+# Also used for Is when considered for clustering.
+score.sum.p0 = 0.5
+
+# The weight for number of used S arrival measures. Assumes only arrival time
+# when exactly 1 value is set. Use a comma-separated list, wT,wSlo,wBaz, for
+# giving specific weight to pick time, slowness and back azimuth, respectively.
+# Example: 2.0,0.0,0.0 .
+# The usage of slowness and back azimuth depends on locator. They are not
+# considered by Hypo71, NonLinLoc, StdLoc and FixedHypocenter.
+score.sum.s = 2.0
+
+# The weight for number of added but unused S arrivals.
+score.sum.s0 = 0.5
+
+# Origin depth is normalized to this value for computing the score
+# contribution. Shallower depths contribute to larger score.
+score.sum.normalizationDepth = 650.0
+
+# The weight of origin depth. Set this value to 0.0 for scoring origins
+# independent of depth whenever shallow and deep sources are equally expected.
+score.sum.depth = 1.0
+
+# Origin RMS is normalized to this value for computing the score contribution.
+# Lower RMS contribute to larger score.
+score.sum.normalizationRMS = 1.5
+
+# The weight of origin RMS residual.
+score.sum.residual = 1.0
+
+# Increase the weight for manual picks by a factor of 1.001. This gives
+# preference to manual picks in case automatic ones co-exist for the same
+# station.
+score.sum.increaseManual = false